Go to the home page
0 CHF 0.00*

Galvanised cast steel pipe connectors 42.4 mm (1¼")

A silver-coloured, cylindrical eyelet with a rough surface, clamped firmly around a vertical, smooth, shiny blue tube. On the left, a flat single tab with a circular hole protrudes. Tube connector for panel mounting.
Eyelet section with single tab 42.4 mm (1¼”)
Pipe connector for panel mounting.
Product number 608055D

CHF 7.70*
Grey pipe clamp with double bracket: secures a blue pipe via a hex screw. Two flat brackets, each with a mounting hole.
Eyelet section with double tab 42.4 mm (1¼”)
Panel mounting tube connector with two eyelets; also used for locking gates.
Product number 608056D

CHF 12.20*
A solid grey metal retaining ring clamps around a vertical blue tube at the centre. On the side is a clearly visible hexagon bolt for secure fastening to the tube. The ring increases friction and prevents slipping.
Adjustment ring, retaining ring 42.4 mm (1¼”)
Support tube connector for increasing the sliding resistance of heavily loaded tube connectors.
Product number 608060D

CHF 3.60*
A silver-coloured adjustment ring with a sturdy, right-facing hook is clamped centrally around a vertical blue tube. The tube connector is used to securely attach chains or similar items to tubes and has a rough metal surface.
Adjustable ring with hook 42.4 mm (1¼”)
Pipe connector for chain fastenings.
Product number 608061D

CHF 6.80*
A grey, sturdy adjustable ring eye pipe connector firmly attached to a blue pipe. It wraps around the pipe; a visible screw secures it in place. On the left, an open eyelet for attaching further elements. The metal has a slightly rough finish.
Adjustment ring diameter 42.4 mm (1¼”)
Internal hinge pipe connector, for Type 63.
Product number 608062D

CHF 5.80*
A grey, sturdy adjustment ring pin, a pipe connector, is clamped around a vertical blue pipe. The external hinge pipe connector has a cylindrical rod protruding upwards and a fixing screw on the side to tighten it.
Adjustment ring pin. 42.4 mm (1¼”)
External hinge pipe connector, for use in combination with Type 62.
Product number 608063D

CHF 7.60*
A sturdy silver metal spacer ring with a polished finish, clamped securely around a blue tube. A downward-curving hook is integrated at the bottom; it is sturdy and suitable for hanging. For tubes with a diameter of 26.9 mm (¾ inch).
Adjustable ring with hook 42.4 mm (1¼”)
Similar to tube connector Type 61, particularly suitable for the construction of coat stands and similar items.
Product number 608064D

CHF 6.80*
A silver, U-shaped grille bracket connects a dark blue grille to a round, blue metal post. The bracket encircles the post and is securely fastened to the grille with a screw.
Mesh holder, single 42.4 mm (1¼”)
Single-sided wire mesh clamp
Product number 608070D

CHF 3.30*
A galvanised double mesh holder, a double-sided wire mesh clamp, is mounted centrally on a vertical blue post. It secures two dark wire meshes on both sides and is fastened with two screws.
Mesh holder, double, 42.4 mm (1¼”)
Double-sided wire mesh clamp
Product number 608071D

CHF 3.80*
Sturdy, silver-coloured elbow connector made of galvanised metal, connects two blue tubes at a variable angle. Two hexagon head screws at the top for securing. Ideal for handrails/vertical supports, 42.4 mm (1¼”) tube.
Elbow 15°–60° variable 42.4 mm (1¼”)
Elbow connector as an end stop for the upper railing with a variable angle of 15° to 60°. Most commonly used for vertical supports on staircases.
Product number 608124D

CHF 16.90*
Silver-grey, adjustable metal elbow connector, connects two blue tubes at an adjustable angle. Sturdy elbow with pivot point and fixing screws. Adjustable from 75° to 210°, for 33.7 mm (1”) tubes.
Elbow, adjustable, 42.4 mm (1¼”)
Variable elbow connector. This connector can be used as a corner from a minimum of 75 degrees to a maximum of 210 degrees.
Product number 608125D

CHF 21.00*
A silver metal crosspiece connects two blue pipes; one runs vertically, the other diagonally at a 45-degree angle. The clamp is secured with screws that hold the pipes firmly in place and allow for a slope.
Cross piece for 45° slope, 42.4 mm (1¼”)
Connecting clamp between the central rail and the rail posts for sloping rails with a fixed angle of up to 45°
Product number 608126D

CHF 25.30*
Galvanised, extra-heavy-duty wall bracket for pipes with a blue, vertical post. Two hex socket screws secure the pipe in the cylindrical clamp. Flat brackets with round holes for fixing.
Horizontal wall bracket, extra heavy-duty 42.4 mm (1¼”)
Extra-heavy-duty pipe connection elbow for vertical posts. This clamp is not suitable for feeding pipes through. Designed for manual fixing of safety railings and balustrades to walls, parapets, stairs and slopes with a flat mounting.
Product number 608146D

CHF 32.40*
Extra-heavy, galvanised step edge footplate for fixing with a blue, vertical tube in the central clamping area. Rectangular base with 2 fixing holes, side flanges each with 2 slotted holes. Tube with 2 hex socket screws.
Step edge base plate 42.4 mm (1¼”)
Extra-heavy base plate for fixing to a step. Most commonly used on roofs.
Product number 608147D

CHF 50.10*
Grey metal T-piece for 21.3 mm pipes connects two blue pipes. One pipe runs horizontally through the upper opening, the other vertically downwards. Two hexagon head screws secure the pipes in the connector.
Short T-piece, combination dimensions: horizontal 48.3 mm (1½”) – vertical 42.4 mm (1¼”)
Same as Type 2, but this version is used to connect pipes of different diameters.
Product number 608002ED

CHF 10.90*
A silver-coloured cross-connector (cross-piece) connects two blue tubes at a 90-degree angle: one vertically, one horizontally. Secured with hex socket screws, ideal for stable tube junctions.
90° cross piece, combination sizes 48.3 mm (1½”) – 42.4 mm (1¼”)
Same pipe connector as Type 28, but with this pipe connector you can assemble structures using two different pipe diameters.
Product number 608028ED

CHF 12.60*
Grey metal articulated foot holder with a rectangular mounting plate and two drill holes for secure wall or floor mounting. An eyelet with a hole in the centre serves as a movable pivot point. Matt, textured finish.
Articulated foot bracket (Unimass)
For fixing structures to walls or floors, usually in conjunction with Type 42.
Product number 608050

CHF 7.40*
Silver-coloured L-shaped pipe connector that joins two blue pipes at a 90-degree angle. The metal elbow has a rough surface and several hex socket screws for securing. Three openings.
Eaves elbow 42.4 mm (1 1/4”)
This pipe connector is required for roof structures, usually in combination with type 91.
Product number 608085D

CHF 27.80*
Grey, cross-shaped metal pipe connector, connects four blue pipes at a 90° angle. The pipes fit securely into the openings and are secured with hexagon head screws. For stabilising structures, e.g. eaves top piece.
Eaves cap 42.4 mm (1 1/4”)
This pipe connector is required for roof structures, usually in combination with Type 85.
Product number 608091D

CHF 22.85*
Silver metal elbow connector, connects two blue tubes at a variable angle (approx. 45°). Smooth, robust, slightly textured. Allen screws at both ends for securing the tubes. Often used as an end stop for handrails/railings.
Curved connector 40°–70°, adjustable. 42.4 mm (1 1/4”).
Elbow connector as an end stop for the upper railing with a variable angle of 40° to 70°. Most commonly used for stair railings.
Product number 608123D

CHF 24.20*
An open cross-piece made of grey metal connects two blue pipes. The upper pipe runs diagonally through the upper opening, whilst the lower pipe lies horizontally beneath it and is held in place by the lower clamp. A clamping screw is visible.
Open cross piece with 42.4 mm (1 1/4”) insert
Open cross piece in which the crossbar is inserted into the insert and then tightened.
Product number 608201D

CHF 17.95*
Sturdy, silver-coloured metal cross-piece for a 90° connection of four blue tubes. The connecting clamp guides the tubes horizontally and vertically, with three visible hexagon socket screws for secure fastening. Ideal for railings.
90° cross connector, combination size (48.3–42.4 mm) 6/4"-5/4
Combination size 48.3 mm to 42.4 mm
Product number SGC119-43

CHF 26.90*
Round, black plastic plug with a slightly textured, matt front. Sides with concentric grooves for a secure fit in thick-walled pipes or openings. For sealing pipe ends.
Plug, black plastic, 42.4 mm (1¼”), for thick-walled pipes (2.5–5.0 mm)
Plastic cap for sealing the end of the pipe.
Product number 608074D

CHF 2.95*
Metal plug with a round, flat front and a square shaft tapering towards the rear. Grey surface with a slightly rough texture. For sealing a thick-walled pipe, suitable for Ø 33.7 mm (1 inch).
Plug, metal 42.4 mm (1¼”)
Aluminium cap for sealing the end of the pipe. Suitable only for thick-walled pipes.
Product number 608073D

CHF 4.80*
Swiss Specialist Retail

Swiss Specialist Retail

Here you will receive expert advice, customer-focused solutions and genuine specialist expertise. Reliable service is guaranteed, even after your purchase!
Your Swiss Expertise Team

Secure payment

Secure payment

You can pay by credit card, Maestro, Sofortüberweisung, Google Pay, Apple Pay, Twint and prepayment. Your payment is always processed via an SSL-encrypted connection.

tuev-sued.jpg

TÜV tested

Our pipe connectors are high quality and TÜV-certified.

architekten_siegel.jpg

Recommended by architects & building designers

Recommended by industry experts and practitioners due to reliable, high-performance quality. For you as a customer, this serves as a guarantee of quality, expertise, and service.

This website uses cookies to provide the best possible experience. More information ...
Loading...
Files are being uploaded, please wait...