Go to the home page
0 CHF 0.00*

Aluminium pipe connectors 30 mm

Silver-coloured aluminium tube connector, 30 mm, connects three bright yellow tubes in a Y-shape: one vertical tube with two angled tubes at 45 and 135 degrees. Clamped with hex socket screws. Smooth metal surface.
Tube connector aluminium 30mm
The tube connector joins two tubes at a 45° and a 135° angle. By clamping two half-shells together, a tube end and a through-tube are connected. The tubes are each drilled twice with Ø 9.0 mm hole.
Product number 40-30

CHF 30.40*
A grey metal fitting connecting two yellow pipes at an angle can be seen in the foreground. The matt finish reflects little light and reveals details such as fixing screws. The pipes run diagonally.
Aluminium joint elbow 30mm
Product number 25-30

CHF 42.30*
A grey, matt-finish aluminium tube connector encircles a bright yellow, cylindrical 30mm tube vertically. The connector has a visible clamping gap and two fixing holes in the triangular mounting surface.
Aluminium support pipe 30mm
The pipe connector joins a pipe parallel to the screw-on surface. The slotted pipe holder clamps the pipe end within the pipe connector. The pipe end is drilled twice with Ø 9.0 mm hole.
Product number 7008-30

CHF 38.40*
Silver wall/floor/ceiling mount made of aluminium holds a vertical, bright yellow tube (Ø 30 mm). Oval base with two fixing holes; side-mounted threaded pin secures firmly without drilling. Tube connector.
Wall, floor and ceiling brackets Aluminium 30mm
The tube connector attaches a tube vertically to a floor, ceiling or wall surface. The threaded pin clamps the end of the tube securely within the tube connector. There is no need to drill the tube.
Product number 12a-30

CHF 11.70*
A shiny, silver aluminium pipe bracket that securely encloses a bright yellow, cylindrical pipe. Two threaded pins on the side for clamping without drilling. Mounting plate with two screw holes.
Aluminium pipe support 30mm
The pipe connector joins a pipe parallel to the mounting surface. The two threaded pins clamp the end of the pipe within the pipe connector. There is no need to drill the pipe.
Product number 11a-30

CHF 32.10*
A shiny, grey aluminium double clamp connects two parallel, bright yellow pipes. The sturdy clamp encloses them at the top and bottom, is secured at the front with two screws and holds firmly without drilling.
Double clamp aluminium 30 mm
The pipe connector joins two pipes in parallel. By clamping two half-shells together, two continuous pipes with a centre-to-centre distance of 56mm are connected in parallel. The pipes do not need to be drilled .
Product number 74-30

CHF 26.60*
A shiny silver aluminium wall bracket clamps a vertical yellow tube. The cylindrical bracket is slotted and has an Allen screw that secures the 30 mm tube firmly in place. Close-up image on a white background.
Wall, floor and ceiling brackets Aluminium 30mm
The pipe connector attaches a pipe vertically to a floor, ceiling or wall surface. Thanks to the slotted pipe holder, the pipe end is clamped within the pipe connector. The pipe end is drilled through to a diameter of 9.0 mm.
Product number 13-30

CHF 9.50*
Silver-coloured aluminium disc holder on a bright yellow tube. It secures a transparent disc between its jaws, held in place by two protruding white plastic screws. Matt finish, tube vertical.
Disc holder Aluminium 30mm
The pipe connector is used as a washer holder. The washers are secured with plastic screws. The pipe connector is screwed onto the pipe or riveted in place. These fasteners are not included in the scope of delivery.
Product number 19-30

CHF 15.80*
Silver aluminium angle bracket connects two yellow cylindrical rods at an angle. Matt finish with visible Allen screw for securing. For tubes with a diameter of 40 mm, angle approx. 150 degrees.
Aluminium elbow 30mm 30°/60°/150°
Product number 32a-30-Wa30-60-150

CHF 22.50*
Silver aluminium wall, floor or ceiling bracket for 40mm pipes, comprising a yellow vertical pipe. The pipe connector clamps it in place with two half-shells. Secured with an Allen screw. Oval mounting plate with two drill holes.
Wall, floor and ceiling mount, aluminium, 30 mm
The pipe connector connects a pipe vertically to a floor, ceiling or wall surface. By clamping two half-shells together, the end of the pipe is connected to the pipe connector. The end of the pipe is drilled once with Ø 9.0mm.
Product number 12-30

CHF 12.10*
Dark grey aluminium T-connector connecting three bright yellow tubes in a 90-degree arrangement. Two tubes are horizontal, whilst a third extends vertically downwards to form a T-shape. Two-piece design, with 3 visible screws.
Aluminium Aluminium T-connector 30mm
The pipe connector joins two pipes at a 90° angle. By clamping two half-shells together, one pipe end and a solid pipe are joined to form a T-shape. The pipes do not need to be drilled.
Product number 70-30

CHF 22.10*
A grey aluminium partition wall bracket with a cam encloses a bright yellow cylindrical tube. The cam holds a thin dark green thread, threaded vertically through a slot. Screw fixed to the 30mm tube.
Partition wall bracket with cam aluminium 30 mm
Product number 16N-30

CHF 12.70*
Close-up of a silver-coloured aluminium floor and ceiling mount for the vertical mounting of a yellow 30mm tube. The tube is clamped in the slotted holder and secured with two Allen screws. Mounting plate with four drill holes.
Floor and ceiling mount, aluminium, 30 mm
The pipe connector attaches a pipe vertically to a floor, ceiling or wall surface. The end of the pipe is clamped into the slotted pipe holder in the pipe connector. The end of the pipe is drilled twice with Ø 9.0 mm.
Product number 10-30

CHF 23.40*
A matt grey aluminium elbow connects two bright yellow tubes at a 90-degree angle. A silver screw on the outside secures the clamp connection between the two half-shells, enabling the tubes to be assembled without drilling.
Aluminium elbow 90° 30mm
The pipe connector joins two pipes at a 90° angle. By clamping two half-shells together, the ends of the two pipes are joined to form a 90° branch. There is no need to drill the pipes.
Product number 31-3090

CHF 14.80*
A grey cross connector secures three bright yellow tubes at a 90-degree angle: one tube vertically, two horizontally opposite each other. The two-part connector is fastened with four screws and creates a sturdy, drill-free cross connection.
Cross connector 30mm
The tube connector joins two tube ends and one continuous tube at a 90° angle. By clamping two half-shells together, two tube ends and one continuous tube are joined to form a cross. The tubes do not need to be drilled.
Product number 50-30

CHF 20.90*
A grey, T-shaped pipe connector that joins two horizontal yellow pipes to a vertical yellow pipe. The connector is secured with three visible silver screws. The pipes are smooth and bright yellow.
T-connector Aluminium 30mm
The pipe connector joins two pipes at a 90° angle. By clamping the two half-shells together, one pipe end and a continuous pipe are joined to form a T. The two pipes are drilled with Ø 9.0 mm.
Product number 72-30

CHF 20.10*
A grey aluminium partition bracket encloses a yellow tube and secures two thin, vertical, greenish partitions on either side. The double bracket is fixed with two screws and clamps the tube securely without drilling, ideal for 40mm tubes.
Partition wall bracket, double aluminium 30mm
The pipe connector functions as a double partition wall bracket. By clamping two half-shells together, the pipe connector is secured to the pipe and simultaneously clamps two partition walls in place. The pipes do not need to be drilled.
Product number 16a-30

CHF 19.30*
A grey aluminium partition bracket encloses a yellow tube and secures two thin, vertical, greenish partitions on either side. The double bracket is fixed with two screws and clamps the tube securely without drilling, ideal for 40mm tubes.
Aluminium partition wall bracket, double with cam 30mm
Product number 16aN-30

CHF 19.30*
Silver-grey aluminium cross connector, connecting five bright yellow tubes. One tube runs vertically through the centre, four extend horizontally at 90° angles. 30mm connector made from clamping half-shells, secured with screws.
Cross connector aluminium 30mm
The tube connector joins five tubes, each at a 90° angle. By clamping four half-shells together, four tube ends and one through-tube are joined to form a corner. The four tube ends are drilled to a diameter of 9.0 mm.
Product number 62-30

CHF 35.10*
A silver-grey ‘ Swissclamp ’ plate support on the bright yellow tube holds a thin, transparent plate securely in place. A screw secures the aluminium support to the tube, emphasising the stability of the 40mm construction.
Plate support aluminium 30mm
The tube connector is used as a panel support. Thanks to the slotted tube holder, this tube connector can be fixed at any position along the tube. There is no need to drill holes in the tubes.
Product number 20-30

CHF 16.60*
A matt silver, textured aluminium angle bracket from Swissclamp connects two bright yellow tubes at an angle. The robust component is split down the middle and secured with two visible Phillips-head screws.
Aluminium elbow 30 mm 60°/30°/120°
The pipe connector joins two pipes at the desired angle. By clamping two half-shells together, the two pipe ends are joined to form a branch. The two pipe ends are drilled through to a diameter of 9.0 mm.
Product number 32-30-Wa60-30-120

CHF 26.00*
A silver-coloured aluminium T-connector joins two yellow tubes. One tube runs vertically, whilst the other is connected at an angle of approximately 55 degrees. The connector consists of two parts and is secured with two screws.
Aluminium T-connector 30mm, 45° horizontal/45° vertical
Product number 71a-30-Wa45-45

CHF 24.40*
Silver aluminium centre support/tube connector clamps a vertical, bright yellow 40mm tube. Features a slotted mounting surface and a rounded fastening element protruding from the side with a hole for parallel mounting without drilling.
centre support Aluminium 30mm
The tube connector joins a continuous tube in parallel to the mounting surface. The slotted tube holder clamps the end of the tube inside the connector. There is no need to drill the tube.
Product number 15-30

CHF 12.00*
Matt grey aluminium floor bearing for 40mm tubes, which securely grips a bright yellow tube. The cylindrical bearing has vertical grooves for clamping. Four fixing holes are visible on the side.
Aluminium support pipe 30mm
The pipe connector joins a pipe parallel to the screw-on surface. The slotted pipe holder clamps the pipe end within the pipe connector. The pipe end is drilled twice with Ø 9.0 mm hole.
Product number 11-30

CHF 38.40*
Swiss Specialist Retail

Swiss Specialist Retail

Here you will receive expert advice, customer-focused solutions and genuine specialist expertise. Reliable service is guaranteed, even after your purchase!
Your Swiss Expertise Team

Secure payment

Secure payment

You can pay by credit card, Maestro, Sofortüberweisung, Google Pay, Apple Pay, Twint and prepayment. Your payment is always processed via an SSL-encrypted connection.

tuev-sued.jpg

TÜV tested

Our pipe connectors are high quality and TÜV-certified.

architekten_siegel.jpg

Recommended by architects & building designers

Recommended by industry experts and practitioners due to reliable, high-performance quality. For you as a customer, this serves as a guarantee of quality, expertise, and service.

This website uses cookies to provide the best possible experience. More information ...
Loading...
Files are being uploaded, please wait...