Go to the home page
0 CHF 0.00*

Aluminium pipe connectors 40 mm

A grey cross connector secures three bright yellow tubes at a 90-degree angle: one tube vertically, two horizontally opposite each other. The two-part connector is fastened with four screws and creates a sturdy, drill-free cross connection.
Cross connector 40mm
The tube connector joins two tube ends and one continuous tube at 90° angles. By clamping two half-shells together, two tube ends and one continuous tube are joined to form a cross. The tubes do not need to be drilled.
Product number 50-40

CHF 23.90*
Grey aluminium elbow connecting two bright yellow tubes at a 45-degree angle. The connector clamps the tube ends with two half-shells and has a screw on the side for drill-free assembly.
Aluminium elbow 45° 40mm
The pipe connector joins two pipes at a 45° angle. By clamping two half-shells together, two pipe ends are joined to form a 45° branch. The pipes do not need to be drilled.
Product number 31-4045

CHF 18.90*
A silver aluminium swivel joint connects two bright yellow cylindrical rods at right angles. Securely fastened with several screws, it ensures a stable connection for 30mm tubes. The surface is smooth with a slight matt finish.
swivel bearing Aluminium 40mm
Product number 75-40

CHF 110.90*
A matt silver, textured aluminium angle bracket from Swissclamp connects two bright yellow tubes at an angle. The robust component is split down the middle and secured with two visible Phillips-head screws.
Aluminium elbow 40 mm, angles 35°, 55° and 145°
Product number 32-40-Wa35-55-145

CHF 26.00*
A shiny, grey aluminium double clamp connects two parallel, bright yellow pipes. The sturdy clamp encloses them at the top and bottom, is secured at the front with two screws and holds firmly without drilling.
Double clamp aluminium 40mm
The pipe connector joins two pipes in parallel. By clamping two half-shells together, two continuous pipes with a centre-to-centre distance of 56mm are connected in parallel. The pipes do not need to be drilled.
Product number 74-40

CHF 25.90*
Dark grey, metallic corner connector precisely joins three bright yellow tubes at a 90-degree angle to form a sturdy corner. Three visible threaded pins secure the tubes firmly in place. Matt, robust finish.
Corner end connector 40mm
The tube connector joins three tubes at a 90° angle. The single-shell tube connector is clamped onto the three tube ends using the three threaded pins. The tubes joined to form a corner do not need to be drilled.
Product number 63-40

CHF 29.30*
A silver-coloured aluminium T-connector joins two yellow tubes. One tube runs vertically, whilst the other is connected at an angle of approximately 55 degrees. The connector consists of two parts and is secured with two screws.
Aluminium T-connector 40 mm 45° outlet/45° inlet
Product number 71a-40-Wa45-45

CHF 29.60*
Close-up of a variable Swissclamp support made from yellow tubing and an aluminium joint. The swivelling joint connects it to a flat base with two screw holes and allows flexible angle adjustment of the 30 mm tube.
Variable aluminium support 40mm, flat base
Product number 23-40

CHF 28.50*
A grey aluminium partition wall bracket, consisting of two half-shells, is clamped securely around a vertical yellow tube. It also secures a transparent partition wall, which is inserted into the recess at the side. Secure fixing without drilling.
Partition wall bracket aluminium 40 mm
The tube connector functions as a partition wall bracket. By clamping two half-shells together, the tube connector is fixed to the tube and simultaneously clamps the partition wall. A 9.0 mm diameter hole is drilled through the partition wall. The tubes do not need to be drilled.
Product number 17-40

CHF 16.60*
Close-up of an aluminium floor and ceiling mount from Swissclamp, which secures a yellow pipe (30 mm) vertically to a surface. The silver component has a round base plate with 4 drill holes and 2 threaded pins.
Floor and ceiling brackets aluminium 40 mm
The pipe connector connects a pipe vertically to a floor, ceiling or wall surface. The two threaded pins clamp the pipe end within the connector. No drilling of the pipe is required.
Product number 10a-40

CHF 23.20*
Grey aluminium angle connector joins three yellow tubes at a 90° angle: one tube running vertically through the centre, two branching off horizontally. Polished Swissclamp tube connector, secured with threaded pins, for 40mm tubes.
Angle connector Aluminium 40mm
The pipe connector joins three pipes at a 90° angle. The single-shell pipe connector is secured to the two pipe ends and the through-pipe using the three threaded pins. The pipes joined to form a corner do not need to be drilled.
Product number 60a-40

CHF 24.80*
A grey aluminium T-joint connects three yellow tubes. A vertical tube is visible at the bottom, whilst two tubes branch off at an angle at the top. Fixing screws are visible. 40 mm joint for flexible connections.
T-joint Aluminium 40mm
Product number 27-40

CHF 53.00*
A shiny, silver aluminium joint connects two bright yellow tubes at a right angle. Features a hex socket screw for fixing the angle and a visible threaded pin for clamping. Smooth, reflective.
head joint Aluminium 40mm
The tube connector joins two tube ends at a variable angle. The tube ends are clamped in place by the two threaded pins. The variable angle is fixed in place by the hexagon socket screw. The tubes do not need to be drilled.
Product number 45-40

CHF 49.20*
Close-up of a grey aluminium joint mount securing a yellow, round support (Ø 40 mm). The robust design allows for variable alignment via a swivelling axis and features a flat mounting plate with two drill holes.
Variable aluminium support 40mm
Product number 24a-40

CHF 37.50*
Silver-coloured aluminium pipe support for a 40 mm pipe, inserted from above. On the right are two small threaded pins for clamping and two larger round openings, demonstrating the clamping principle of the pipe connector without the need for drilling.
Aluminium support tube 40 mm
The pipe connector connects a pipe parallel to the mounting surface. The two threaded pins clamp the pipe end within the pipe connector. The pipe does not need to be drilled.
Product number 1160-40

CHF 24.30*
A silver-coloured aluminium cross connector from Swissclamp, which connects two yellow, round rods at a 45-degree angle. The connector is split in the middle and secured with two screws, ensuring a stable connection.
Cross connector Aluminium 40mm, 30°/60°
Product number 50a-40-Wa30-60

CHF 47.80*
A grey, matt-finish aluminium tube connector encircles a bright yellow, cylindrical 30mm tube vertically. The connector has a visible clamping gap and two fixing holes in the triangular mounting surface.
Aluminium support tube 40 mm
The pipe connector joins a pipe parallel to the mounting surface. The slotted pipe holder clamps the pipe end within the pipe connector. The pipe end is drilled twice with a Ø 9.0mm hole.
Product number 7008-40

CHF 34.60*
Close-up of a grey Swissclamp bracket for a 40mm skirting board, clamped securely around a smooth, cylindrical, bright yellow aluminium tube. Front features three precise drill holes for screws. Matt finish.
Bracket for aluminium 40 mm skirting board
Product number 1412-40

CHF 15.30*
A grey aluminium partition wall bracket with a cam encloses a bright yellow cylindrical tube. The cam holds a thin dark green thread, threaded vertically through a slot. Screw fixed to the 30mm tube.
Partition wall bracket with cam aluminium 40 mm
Product number 16N-40

CHF 13.40*
Swissclamp’s grey corner connector for 35mm tubes joins four yellow tubes at a right angle. The clamp holds the elements firmly together and is secured with two visible screws. Ideal for sturdy modular builds.
Angle connector Aluminium 40mm
The tube connector joins two tube ends and a continuous tube at 90° angles. The three threaded pins are used to clamp the single-shell tube connector onto the tubes. The tubes connected to form a cross do not need to be drilled.
Product number 60-40

CHF 28.90*
Silver wall/floor/ceiling mount made of aluminium holds a vertical, bright yellow tube (Ø 30 mm). Oval base with two fixing holes; side-mounted threaded pin secures firmly without drilling. Tube connector.
Wall, floor and ceiling mount aluminium 40mm
The tube connector connects a tube vertically to a floor, ceiling or wall surface. The threaded pin clamps the end of the tube in the tube connector. The tube does not need to be drilled.
Product number 12a-40

CHF 15.60*
A grey aluminium partition wall bracket with a cam encloses a bright yellow cylindrical tube. The cam holds a thin dark green thread, threaded vertically through a slot. Screw fixed to the 30mm tube.
Partition wall bracket aluminium 40mm
The pipe connector is used as a partition wall holder. Through the clamping of two half-shells, the pipe connector is fixed to the pipe and simultaneously clamps the partition wall. The pipes do not need to be drilled.
Product number 16-40

CHF 13.40*
Silver-grey, flexible aluminium cross connector, connecting several yellow round tubes. One tube vertical, one horizontal, a third at an angle. Secured with visible Allen screws for a stable tubular structure.
Cross connector aluminium 40 mm, flexible
Product number 50F-40

CHF 58.80*
A silver-coloured aluminium T-connector joins two yellow tubes. One tube runs vertically, whilst the other is connected at an angle of approximately 55 degrees. The connector consists of two parts and is secured with two screws.
Aluminium T-connector 40 mm, angle 35°/55°
Product number 71a-40-Wa35-55

CHF 36.70*
A grey metal fitting connecting two yellow pipes at an angle can be seen in the foreground. The matt finish reflects little light and reveals details such as fixing screws. The pipes run diagonally.
Aluminium joint 40 mm
Product number 25-40

CHF 42.10*
A matt silver, textured aluminium angle bracket from Swissclamp connects two bright yellow tubes at an angle. The robust component is split down the middle and secured with two visible Phillips-head screws.
Angle bracket aluminium 40mm Wa 60°/Wb 30°/120°
Product number 32-40-Wa60-30-120

CHF 26.00*
Close-up of a grey aluminium joint mount securing a yellow, round support (Ø 40 mm). The robust design allows for variable alignment via a swivelling axis and features a flat mounting plate with two drill holes.
Variable aluminium support 40mm
The pipe connector attaches a pipe at a variable angle to the mounting surface. The threaded pin clamps the end of the pipe within the connector. The variable angle is fixed using the hexagon socket screw. No drilling of the pipe is required.
Product number 24-40

CHF 31.20*
Close-up of a grey clamp connecting two bright yellow pipes: one runs horizontally at the top, the other extends vertically downwards at the bottom. The matt metal clamp is secured at the front with two silver screws.
T-connector Aluminium 40mm
The pipe connector joins two pipes at a 90° angle. By clamping two half-shells together, a pipe end and a continuous pipe are joined together to form a T. The pipes do not need to be drilled.
Product number 71-40

CHF 15.00*
Dark grey aluminium T-connector connecting three bright yellow tubes in a 90-degree arrangement. Two tubes are horizontal, whilst a third extends vertically downwards to form a T-shape. Two-piece design, with 3 visible screws.
T-connector Aluminium 40mm
The pipe connector joins two pipes at a 90° angle. By clamping two half-shells together, a pipe end and a continuous pipe are joined together to form a T. The pipes do not need to be drilled.
Product number 70-40

CHF 44.70*
A silver-coloured aluminium end support clamps a yellow tube. The tube connector has a slotted receptacle that encloses the upper end of the tube. A side screw secures the tube; two holes at the top allow for parallel mounting.
End support Aluminium 40mm
The tube connector secures a tube parallel to the screw-on surface. The slotted tube holder clamps the tube end within the tube connector. No drilling of the tube is required.
Product number 14-40

CHF 22.10*
Close-up of a grey, double partition wall bracket made of aluminium, attached to a vertical yellow tube. The bracket secures two thin, vertical, transparent panels on either side of the tube and is fixed in place with four screws.
Aluminium partition wall bracket, double 40mm
Product number 17a-40

CHF 25.70*
A silver aluminium T-joint connects three bright yellow tubes at a corner. Two run horizontally to the left and right, the third vertically downwards. Small threaded pins at the joints secure the tubes in place.
T-joint Aluminium 40mm
The pipe connector joins three pipes at a variable angle. The pipes are clamped in place by the threaded pins. The variable angle is fixed in place by the hexagon socket screw. The pipes do not need to be drilled.
Product number 29-40

CHF 54.20*
A grey aluminium partition bracket encloses a yellow tube and secures two thin, vertical, greenish partitions on either side. The double bracket is fixed with two screws and clamps the tube securely without drilling, ideal for 40mm tubes.
Aluminium partition wall bracket, double with cam, 40 mm
Product number 16aN-40

CHF 26.60*
A flexible T-connector made of silver-grey aluminium connects three bright yellow cylindrical rods: the top one at right angles to the vertical rod, the third one sloping upwards to the right. Several screws secure everything firmly in place.
T-connector Aluminium 40mm, flexible
T-connector, flexible
Product number 71F-40

CHF 58.40*
A silver-coloured aluminium cross connector from Swissclamp, which connects two yellow, round rods at a 45-degree angle. The connector is split in the middle and secured with two screws, ensuring a stable connection.
Aluminium cross connector 40mm, angle 35°/55°
Product number 50a-40-Wa35-55

CHF 38.50*
Sturdy silver-coloured aluminium cross joint connecting four bright yellow round tubes. The tubes are firmly anchored in the sockets and secured with a visible Allen screw. Precise 40mm connector for stable right-angled constructions.
cross joint Aluminium 40mm
Product number 28-40

CHF 54.20*
A light-coloured, cylindrical aluminium reducer, standing upright on a white surface. Features a continuous, vertical side opening for inserting and securing a tube. The matt, smooth surface is slightly reflective.
Reducer Aluminium 40mm
Product number 35-40

CHF 9.00*
A grey aluminium tube connector consisting of two halves joins two bright yellow tubes centrally on a single axis. The connection is clamped in place by two visible Allen screws. For linear mounting of 40mm tubes.
Connection aluminium 40mm
The tube connector joins two tubes in a single axis. By clamping two half-shells together, the tube connector is joined to the tube ends. The two tube ends are drilled through to a diameter of 9.0 mm.
Product number 18-40

CHF 19.10*
Close-up of a variable Swissclamp support made from yellow tubing and an aluminium joint. The swivelling joint connects it to a flat base with two screw holes and allows flexible angle adjustment of the 30 mm tube.
Variable aluminium strut 40mm, concave foot
Product number 23a-40

CHF 28.50*
A silver-grey ‘ Swissclamp ’ plate support on the bright yellow tube holds a thin, transparent plate securely in place. A screw secures the aluminium support to the tube, emphasising the stability of the 40mm construction.
aluminium panel support 40 mm
Product number 20-40

CHF 10.90*
A silver aluminium plate holder clamps a pale yellow tube. The connector has two half-shells that enclose the tube and secure it without drilling. A side mounting surface with a hole keeps it parallel to the mounting surface.
Panel holder Aluminium 40mm
The pipe connector joins a pipe parallel to the mounting surface. By clamping two half-shells together, the pipe connector is clamped to the pipe. The pipe does not need to be drilled.
Product number 38-40

CHF 15.80*
Silver aluminium angle bracket connects two yellow cylindrical rods at an angle. Matt finish with visible Allen screw for securing. For tubes with a diameter of 40 mm, angle approx. 150 degrees.
Aluminium angle bracket 40mm 45°/45°/135°
Product number 32a-40-Wa45-45-135

CHF 24.30*
Silver-grey aluminium cross connector, connecting five bright yellow tubes. One tube runs vertically through the centre, four extend horizontally at 90° angles. 30mm connector made from clamping half-shells, secured with screws.
Cross connector aluminium 40mm
The tube connector joins five tubes at a 90° angle. By clamping four half-shells, four tube ends and one continuous tube are joined together to form a corner. The four tube ends are drilled through to a diameter of 9.0 mm.
Product number 62-40

CHF 37.50*
Close-up of a grey aluminium joint for 40mm tubes, firmly connecting two bright yellow cylindrical rods. One rod runs vertically, the other diagonally upwards to the right, securely.
Aluminium joint 40 mm
Product number 26-40

CHF 51.30*
Silver, flexible aluminium corner pipe bracket for upright mounting of a yellow pipe. Two movable joint sections, ideal for flexible pipe mounting, e.g. 40 mm. Each segment has screw mounting points.
Corner pipe bracket aluminium, flexible 40 mm
Product number 1155-40

CHF 38.00*
Silver-coloured aluminium floor mount holds a yellow, cylindrical tube in a vertical position. The 40mm tube sits centrally in the mount and is secured at the sides with threaded pins. Round base with two holes for floor mounting.
Floor support Aluminium 40mm
The pipe connector connects a pipe vertically to a floor surface and is suitable for receiving skirting boards. The threaded pins clamp the pipe end and the skirting boards. The pipe and the skirting boards do not need to be drilled.
Product number 1410-40

CHF 27.50*
A light grey aluminium pipe support for 40 mm pipes, which securely clamps a yellow pipe. The robust clamp connection with two threaded pins on the sides allows the pipe to be easily mounted parallel to the mounting surface without drilling into the pipe.
Aluminium support tube 40 mm
The pipe connector connects a pipe parallel to the mounting surface. The two threaded pins clamp the pipe end within the pipe connector. The pipe does not need to be drilled.
Product number 7008a-40

CHF 33.40*
Silver aluminium wall, floor or ceiling bracket for 40mm pipes, comprising a yellow vertical pipe. The pipe connector clamps it in place with two half-shells. Secured with an Allen screw. Oval mounting plate with two drill holes.
Wall, floor and ceiling mount aluminium 40 mm
The pipe connector connects a pipe vertically to a floor, ceiling or wall surface. By clamping two half-shells together, the pipe end is connected to the pipe connector. The pipe end is drilled once with Ø 9.0 mm hole.
Product number 12-40

CHF 17.50*
A silver aluminium T-connector joins four bright yellow tubes at a 90° angle. Three horizontal tube ends are clamped together by a continuous vertical tube. The 30mm connector is secured with visible screws.
T-connector Aluminium 40mm
The tube connector joins four tubes at a 90° angle. By clamping three half-shells together, three tube ends and a continuous tube are joined together to form a corner. The three tube ends are drilled through to a diameter of 9.0 mm.
Product number 61-40

CHF 33.90*
A silver aluminium cross joint connects three yellow round tubes against a light grey background. One tube runs vertically, whilst two others branch off diagonally downwards at different angles. Screws visible, for 40mm tubes.
cross joint Aluminium 40mm
Product number 22-40

CHF 95.00*
A matt grey aluminium elbow connects two bright yellow tubes at a 90-degree angle. A silver screw on the outside secures the clamp connection between the two half-shells, enabling the tubes to be assembled without drilling.
Aluminium elbow 90° 40mm
The pipe connector joins two pipes at a 90° angle. By clamping two half-shells together, two pipe ends are joined to form a 90° branch. The pipes do not need to be drilled.
Product number 31-4090

CHF 20.50*
Silver aluminium angle bracket connects two yellow cylindrical rods at an angle. Matt finish with visible Allen screw for securing. For tubes with a diameter of 40 mm, angle approx. 150 degrees.
Aluminium elbow 40mm 30°/60°/150°
Product number 32a-40-Wa30-60-150

CHF 25.50*
A grey aluminium partition bracket encloses a yellow tube and secures two thin, vertical, greenish partitions on either side. The double bracket is fixed with two screws and clamps the tube securely without drilling, ideal for 40mm tubes.
Partition wall bracket, double aluminium 40mm
The tube connector functions as a double partition wall bracket. By clamping two half-shells together, the tube connector is fixed to the tube and simultaneously clamps two partition walls. The tubes do not need to be drilled.
Product number 16a-40

CHF 26.60*
A shiny, silver aluminium pipe bracket that securely encloses a bright yellow, cylindrical pipe. Two threaded pins on the side for clamping without drilling. Mounting plate with two screw holes.
Aluminium support pipe 40mm
The pipe connector connects a pipe parallel to the mounting surface. The two threaded pins clamp the pipe end within the pipe connector. The pipe does not need to be drilled.
Product number 11a-40

CHF 33.40*
A silver-coloured aluminium cross connector from Swissclamp, which connects two yellow, round rods at a 45-degree angle. The connector is split in the middle and secured with two screws, ensuring a stable connection.
Cross connector aluminium 40mm, angle 55°/35°
Product number 50a-40-Wa55-35

CHF 32.00*
A silver-coloured aluminium T-connector joins two yellow tubes. One tube runs vertically, whilst the other is connected at an angle of approximately 55 degrees. The connector consists of two parts and is secured with two screws.
Aluminium T-connector 40 mm, 55° angle, 35° angle
Product number 71a-40-Wa55-35

CHF 31.20*
A silver aluminium tube connector secures two bright yellow tubes. One tube runs vertically through the connector, whilst the second is mounted at a 45-degree angle from top left to bottom right. Fasten with two Allen screws.
Tube connector Aluminium 40mm
The pipe connector joins two pipes at a 45° and a 135° angle. By clamping two half-shells together, a pipe end and a continuous pipe are joined. The pipes do not need to be drilled.
Product number 40a-40

CHF 29.60*
A matt silver, textured aluminium angle bracket from Swissclamp connects two bright yellow tubes at an angle. The robust component is split down the middle and secured with two visible Phillips-head screws.
Aluminium elbow 40mm 30°/60°/150°
Product number 32-40-Wa30-60-150

CHF 28.00*
A silver-coloured aluminium T-connector joins two yellow tubes. One tube runs vertically, whilst the other is connected at an angle of approximately 55 degrees. The connector consists of two parts and is secured with two screws.
Aluminium T-connector 40 mm, 30°/60°
Product number 71a-40-Wa30-60

CHF 39.40*
Close-up of a silver-coloured aluminium floor and ceiling mount for the vertical mounting of a yellow 30mm tube. The tube is clamped in the slotted holder and secured with two Allen screws. Mounting plate with four drill holes.
Floor and ceiling brackets aluminium 40 mm
The tube connector connects a tube vertically to a floor, ceiling or wall surface. The end of the tube is clamped into the slotted tube holder in the tube connector. The end of the tube is drilled twice with Ø 9.0 mm.
Product number 10-40

CHF 23.60*
A silver-grey aluminium swivel joint that firmly connects two bright yellow vertical tubes (40 mm diameter). Visible screws secure the robust, symmetrical clamping piece around both tubes to ensure a stable connection.
swivel bearing Aluminium 40mm
Product number 76-40

CHF 110.90*
A matt silver, textured aluminium angle bracket from Swissclamp connects two bright yellow tubes at an angle. The robust component is split down the middle and secured with two visible Phillips-head screws.
Aluminium angle bracket 40mm 45°/45°/135°
Product number 32-40-Wa45-45-135

CHF 26.00*
Silver-coloured aluminium disc holder on a bright yellow tube. It secures a transparent disc between its jaws, held in place by two protruding white plastic screws. Matt finish, tube vertical.
Disc holder aluminium 40mm
The pipe connector is used as a washer holder. The washers are secured with plastic screws. The pipe connector is screwed or riveted to the pipe. These fasteners are not included in the scope of delivery.
Product number 19-40

CHF 15.80*
A grey aluminium double clamp connects two bright yellow, vertically arranged tubes in parallel. The clamp encloses each 30mm tube with two bolted half-shells and secures them firmly without the need for drilling.
Double clamp Aluminium 40mm
The pipe connector joins two pipes in parallel. By clamping two half-shells together, two continuous pipes with a centre-to-centre distance of 96mm are connected in parallel. The pipes do not need to be drilled.
Product number 73-40

CHF 22.10*
A silver-grey aluminium plate holder is attached to a bright yellow tube and holds a transparent glass plate horizontally. The slotted tube mount enables easy positioning and secure fastening of the tube connector without drilling.
Panel holder Aluminium 40mm
The pipe connector is used as a panel holder. Thanks to the slotted pipe mount, this pipe connector can be fixed at any position along the pipe. The pipes do not need to be drilled.
Product number 21-40

CHF 27.70*
A silver-coloured aluminium cross connector from Swissclamp, which connects two yellow, round rods at a 45-degree angle. The connector is split in the middle and secured with two screws, ensuring a stable connection.
Aluminium cross connector 40mm female/male 45° 45°
Product number 50a-40-Wa45-45

CHF 32.00*
Grey, T-shaped pipe connector for 40mm pipes with a continuous main opening and a right-angled side opening that can be secured with screws. Matt, smooth surface. Visible: 2 screws at the top, 1 at the bottom. For horizontal pipe connections.
T-connector long 40 mm
This pipe connector can be used when a connection point is required in a horizontal pipe.
Product number BR2064b

CHF 24.10*
Silver-coloured aluminium tube connector, 30 mm, connects three bright yellow tubes in a Y-shape: one vertical tube with two angled tubes at 45 and 135 degrees. Clamped with hex socket screws. Smooth metal surface.
Tube connector Aluminium 40mm
The tube connector joins two tubes at a 45° and a 135° angle. By clamping two half-shells together, a tube end and a through-tube are connected. The tubes are each drilled twice with Ø 9.0mm hole.
Product number 40-40

CHF 36.10*
A grey aluminium plate holder clamps a yellow tube vertically. The tube connector consists of two half-shells secured with screws. One side has a flat mounting surface with a mounting hole.
Panel holder Aluminium 40mm
The pipe connector joins a pipe parallel to the mounting surface. By clamping two half-shells together, the pipe connector is clamped to the pipe. The pipe does not need to be drilled.
Product number 38a-40

CHF 17.80*
Yellow cylinder in a silver, rectangular metal block; two screw heads visible. Knurled knob on the side and threaded rod with a black cap for clamping. Precision tool serving as a 30 mm drilling guide.
drilling guide 40 mm
Product number 80-40

CHF 88.60*
Matt grey aluminium floor bearing for 40mm tubes, which securely grips a bright yellow tube. The cylindrical bearing has vertical grooves for clamping. Four fixing holes are visible on the side.
Aluminium support tube 40 mm
The pipe connector joins a pipe parallel to the mounting surface. The slotted pipe holder clamps the pipe end within the pipe connector. The pipe end is drilled twice with a Ø 9.0mm hole.
Product number 11-40

CHF 34.60*
Silver aluminium centre support/tube connector clamps a vertical, bright yellow 40mm tube. Features a slotted mounting surface and a rounded fastening element protruding from the side with a hole for parallel mounting without drilling.
Aluminium support centre 40mm
The tube connector joins a continuous tube parallel to the mounting surface. The slotted tube holder clamps the tube end within the connector. No drilling of the tube is required.
Product number 15-40

CHF 19.80*
Matt grey aluminium floor bearing for 40mm tubes, which securely grips a bright yellow tube. The cylindrical bearing has vertical grooves for clamping. Four fixing holes are visible on the side.
Aluminium bracket floor 40mm
Product number 1411-40

CHF 30.50*
Grey aluminium elbow, 90-degree pipe connector, connects two bright yellow pipes at a right angle. Consists of two half-shells, bolted together with four visible screws. Sturdy 90-degree connection for 30mm pipes.
Aluminium elbow 90° 40mm
The pipe connector joins two pipes at a 90° angle. By clamping two half-shells together, the two pipe ends are joined to form a 90° branch. The two pipe ends are drilled through to a diameter of 9.0 mm.
Product number 30-40

CHF 20.50*
Swiss Specialist Retail

Swiss Specialist Retail

Here you will receive expert advice, customer-focused solutions and genuine specialist expertise. Reliable service is guaranteed, even after your purchase!
Your Swiss Expertise Team

Secure payment

Secure payment

You can pay by credit card, Maestro, Sofortüberweisung, Google Pay, Apple Pay, Twint and prepayment. Your payment is always processed via an SSL-encrypted connection.

tuev-sued.jpg

TÜV tested

Our pipe connectors are high quality and TÜV-certified.

architekten_siegel.jpg

Recommended by architects & building designers

Recommended by industry experts and practitioners due to reliable, high-performance quality. For you as a customer, this serves as a guarantee of quality, expertise, and service.

This website uses cookies to provide the best possible experience. More information ...
Loading...
Files are being uploaded, please wait...