Go to the home page
0 CHF 0.00*

Cast steel pipe connector, black, 48.3 mm (1½")

A matt black T-piece connects three tubes to form a vertical structure. One tube runs horizontally through the upper section, whilst another is connected vertically downwards. Two Allen screws at the front secure everything firmly in place.
T-piece, short, black 48.3 mm (1½”)
For creating a vertical connection between two pipes. Upper pipe connector for straight and horizontal railing posts. This pipe connector cannot be used to connect a horizontal pipe within the pipe connector. These pipe connectors are characterised by a high degree of corrosion resistance. The black paint penetrates deep into the material and prevents rusting from the inside. The paint is not UV-resistant and is therefore not suitable for outdoor use.
Product number 6080Z02E

CHF 14.80*
Black T-piece connecting three black pipes at a 90-degree angle. Sturdy pipe connector with a slightly rough surface and three visible hex socket screws for securing. Long T-piece for horizontal pipe connections.
T-piece, long, black 48.3 mm (1½”)
Similar to Type 2. This pipe connector can be used when a connection point is required in a horizontal pipe. These pipe connectors are characterised by a high degree of corrosion resistance. The black paint penetrates deep into the material and prevents rusting from the inside. The paint is not UV-resistant and is therefore not suitable for outdoor use.
Product number 6080Z04E

CHF 25.80*
Black 90-degree elbow with a matt, slightly textured finish, connects two black pipes at a right angle. Two visible Allen screws secure the ends. Robust, corrosion-resistant construction for secure installations.
90° elbow, black 48.3 mm (1½”)
Elbow connector for use as an end pipe connector for the upper railing element. These pipe connectors are characterised by a high degree of corrosion resistance. The black paint penetrates deep into the material and prevents rusting from the inside. The paint is not UV-resistant and is therefore not suitable for outdoor use.
Product number 6080Z06E

CHF 19.10*
Black, cylindrical extension piece with a rough surface connects two vertical black tubes. Two countersunk Allen screws (top/bottom) for tightening. Sturdy connecting clamp for 48.3 mm tubes.
Extension piece, external, black 48.3 mm (1½”)
Coupling for pipes of the same diameter. Not suitable for heavy vertical loads. These pipe couplings are characterised by a high degree of corrosion resistance. The black paint penetrates deep into the material and prevents rusting from the inside. The paint is not UV-resistant and is therefore not suitable for outdoor use.
Product number 6080Z08E

CHF 15.90*
Detail of a black extension piece connecting two smooth tubes. The central element has a rough texture and features a round opening with an Allen screw. This flush connection is corrosion-resistant.
Extension piece, internal, black 48.3 mm (1½”)
Enables a streamlined, flush connection between two pipes of the same size. The wall thickness must be 3.2 mm. Do not apply direct load to this connection. These pipe connectors are characterised by a high degree of corrosion resistance. The black paint penetrates deep into the material and prevents rusting from the inside. The paint is not UV-resistant and is therefore not suitable for outdoor use.
Product number 6080Z09E

CHF 16.50*
Black, round base plate pipe connector for a vertical black pipe. Features multiple predrilled mounting holes and a side-mounted hex socket for secure fastening. Visible rough cast iron finish, ideal for positioning.
Base plate, round, black 48.3 mm (1½”)
Base plate, round. This tube connector is used in structures where positional fixation is required. Do not use as a base flange to support guardrails or similar systems. These tube connectors are characterised by a high degree of corrosion resistance. The black paint penetrates deep into the material and prevents rusting from the inside. The paint is not UV-resistant and is therefore not suitable for outdoor use.
Product number 6080Z10E

CHF 23.20*
Black, square base plate with a rough, textured surface. A black metal tube runs vertically through a central cylindrical sleeve. A hexagon socket screw on the side secures the tube firmly in place. Plate with 4 mounting holes.
Base plate, square, solid, black 48.3 mm (1½”)
This tube connector is used in structures where positional fixing is required. Do not use as a base flange to support guardrails or similar systems.
Product number 6080Z11E

CHF 19.70*
Oval black base plate for supporting vertical posts. The screw-on tube connector encloses a black tube and is secured by two side set screws. The sturdy base plate is made of metal and has two holes for fixing.
Base plate, oval, black 48.3 mm (1½”)
Strong base plate for supporting vertical posts. Vertical wide ribs with two adjusting screws increase the strength of the tube connector. The fixing holes in the base flange should be selected to match the load applied. These tube connectors are characterised by a high degree of corrosion resistance. The black paint penetrates deep into the material and prevents rusting from the inside. The paint is not UV-resistant and is therefore not suitable for outdoor use.
Product number 6080Z12E

CHF 33.20*
Sturdy, black three-way elbow, connects three cylindrical pipes at a 90-degree angle. Two pipes horizontally to the left and right, one vertically downwards. Matt, slightly textured surface, visible fixing screw at the front.
Three-way elbow, 90°, black 48.3 mm (1½”)
Corner connector (90°) for upper railing corner pieces and all other rectangular systems. These pipe connectors are characterised by a high degree of corrosion resistance. The black paint penetrates deep into the material and prevents rusting from the inside. The paint is not UV-resistant and is therefore not suitable for outdoor use.
Product number 6080Z18E

CHF 26.60*
A sturdy black corner joint that connects three pipes at a 90-degree angle. A vertical pipe runs through the centre, with two horizontal pipes connected at the sides. Matt black textured finish with screws.
90° corner joint, solid, black, 48.3 mm (1½”)
Used as a counterpart to Type 18; the pipe fits through the connector. These pipe connectors are characterised by a high degree of corrosion resistance. The black paint penetrates deep into the material and prevents rusting from the inside. The paint is not UV-resistant and is therefore not suitable for outdoor use.
Product number 6080Z20E

CHF 22.10*
Black, cross-shaped pipe connector with a rough texture, connecting four black pipes at a 90-degree angle. Three Allen screws visible at the front for fastening. Matt, corrosion-resistant metal component.
Cross piece, solid black, 90° connecting clamp 48.3 mm (1½”)
90° connecting clamp between the central element and the post on railings. These pipe connectors are characterised by a high degree of corrosion resistance. The black paint penetrates deep into the material and prevents rusting through from the inside. The paint is not UV-resistant and is therefore not suitable for outdoor use.
Product number 6080Z22E

CHF 22.40*
Detailed view of a black T-joint connecting a vertical support tube to three horizontal tubes arranged at right angles. Sturdy connector with visible Allen screws and a slightly textured surface.
T-piece for support tube, black 48.3 mm (1½”)
3-way connector for securing supports with 3 horizontal tubes arranged perpendicular to one another. The support tube fits through the connector. These tube connectors are characterised by a high degree of corrosion resistance. The black paint penetrates deep into the material and prevents rusting from the inside. The paint is not UV-resistant and is therefore not suitable for outdoor use.
Product number 6080Z24E

CHF 27.20*
Close-up of a black, four-armed metal cross-piece/pipe connector. A vertical pipe runs through the centre, with four horizontal pipes attached at right angles. Each pipe is secured with an Allen screw.
Cross-piece for support pipe, black 48.3 mm (1½”)
4-way connector for securing supports with 4 horizontal tubes arranged perpendicular to one another. The support tube fits through the connector. These tube connectors are characterised by a high degree of corrosion resistance. The black paint penetrates deep into the material and prevents rusting from the inside. The paint is not UV-resistant and is therefore not suitable for outdoor use.
Product number 6080Z26E

CHF 44.00*
A black metal cross joint connects two black pipes at a 90-degree angle. The robust cast iron component encloses a vertical and a horizontal pipe, with visible screw holes. Matt black, slightly textured.
Cross fitting, offset, 90°, black 48.3 mm (1½”)
Cross-connection clamps (90°) are used for long pipe intersections with supports, reducing cutting costs and increasing the strength of the system whilst maintaining the continuity of the pipe used. These pipe connectors are characterised by a high degree of corrosion resistance. The black paint penetrates deep into the material and prevents rusting from the inside. The paint is not UV-resistant and is therefore not suitable for outdoor use.
Product number 6080Z28E

CHF 15.00*
Black, open T-piece for connecting tubes: connects two black tubes horizontally and a third vertically. Matt, slightly textured surface; tubes are smooth. Several Allen screws secure the tubes in the connector.
T-piece, open 48.3 mm (1½”)
For the extension and modification of existing structures. These pipe connectors are characterised by a high degree of corrosion resistance. The black paint penetrates deep into the material and prevents rusting through from the inside. The paint is not UV-resistant and is therefore not suitable for outdoor use.
Product number 6080Z32E

CHF 15.20*
Close-up of a black, open cross-piece pipe connector connecting two black metal pipes at a 90-degree angle. Matt, slightly rough surface due to corrosion-resistant paint. Allen screw visible on the side. For 42.4 mm pipes.
Cross joint, open 48.3 mm (1½”)
90° cross-connecting clamp as an addition to an existing structure. These pipe connectors are characterised by a high degree of corrosion resistance. The black paint penetrates deep into the material and prevents rusting from the inside. The paint is not UV-resistant and is therefore not suitable for outdoor use.
Product number 6080Z33E

CHF 17.40*
Black handrail bracket constructed from robust material, designed to encase and secure a horizontal black handrail. Textured surface finish, with a screw for securing to the tube. Two drill holes on the base for wall mounting.
Black handrail bracket 48.3 mm (1½”)
For fixing handrails and structures to the wall. These pipe connectors are characterised by a high degree of corrosion resistance. The black paint penetrates deep into the material and prevents rusting from the inside. The paint is not UV-resistant and is therefore not suitable for outdoor use.
Product number 6080Z34E

CHF 15.80*
A black metal swivel eye securely encloses a smooth black pipe. The surface is matt and slightly rough. On the right is a flat extension with a circular fixing hole. A screw secures it to the pipe.
Black swivel eye 48.3 mm (1½”)
For use with Type 42 articulated tube connectors, as well as for fixing panels and boards. These tube connectors are characterised by a high degree of corrosion resistance. The black paint penetrates deep into the material and prevents rusting through from the inside. The paint is not UV-resistant and is therefore not suitable for outdoor use.
Product number 6080Z36E

CHF 11.90*
A black, double-jointed metal pipe connector that encloses a vertical black pipe. On both sides of the connector are flat tabs, each with a round opening for fastening purposes.
Double swivel eye, black, 48.3 mm (1½”)
Similar to Type 36, with two eyelets on the same axis. These pipe connectors are characterised by a high degree of corrosion resistance. The black paint penetrates deep into the material and prevents rusting through from the inside. The paint is not UV-resistant and is therefore not suitable for outdoor use.
Product number 6080Z38E

CHF 11.20*
Black metal articulated bracket with a rough, matt finish. A matching black tube is inserted at the top and secured at the side with an Allen screw. At the bottom, the connector forms a U-shaped fork with a hole for attaching an articulated joint.
Black articulated bracket 48.3 mm (1½”)
This is a component of the articulated pipe connector, which is generally not used on its own. These pipe connectors are characterised by a high degree of corrosion resistance. The black paint penetrates deep into the material and prevents rusting through from the inside. The paint is not UV-resistant and is therefore not suitable for outdoor use.
Product number 6080Z42E

CHF 14.30*
A black joint connects two black tubes. The simple joint has a rough, matt finish and is secured at both ends with visible hex socket screws. A central screw allows for variable angles.
Single joint, black 48.3 mm (1½”)
Articulated pipe connectors for adjustable angle mounting. These pipe connectors are characterised by a high degree of corrosion resistance. The black paint penetrates deep into the material and prevents rusting from the inside. The paint is not UV-resistant and is therefore not suitable for outdoor use.
Product number 6080Z44E

CHF 23.20*
Close-up of a black, adjustable angle joint that flexibly connects two tubes. A matt, rough surface and visible Allen screws emphasise the stability of this tube connector with precise angle adjustment.
Angle joint, adjustable, black 48.3 mm (1½”)
Used in pairs to allow angle adjustment between 90 and 180 degrees. These pipe connectors are characterised by a high degree of corrosion resistance. The black paint penetrates deep into the material and prevents rusting from the inside. The paint is not UV-resistant and is therefore not suitable for outdoor use.
Product number 6080Z49E

CHF 16.50*
Black articulated base with a rectangular base plate. Two round mounting holes at each end for wall or floor mounting. In the centre, an upright, articulated bolt with an additional hole for flexible connections. Matt, slightly textured finish.
Articulated wall bracket (Unimass) black
For fixing structures to walls or floors, usually in conjunction with Type 42. These pipe connectors are characterised by a high degree of corrosion resistance. The black paint penetrates deep into the material and prevents rusting from the inside. The paint is not UV-resistant and is therefore not suitable for outdoor use.
Product number 6080Z50

CHF 10.10*
A black, swivelling articulated base made of sturdy metal holds a black support post upright. The articulated plate with two fixing holes is designed for angled wall mounting or stable support. Rough, matt finish.
Black swivel base 48.3 mm (1 1/2")
Used for angled wall mounting or as a support for a support post.
Product number 6080Z51E

CHF 23.80*
Swiss Specialist Retail

Swiss Specialist Retail

Here you will receive expert advice, customer-focused solutions and genuine specialist expertise. Reliable service is guaranteed, even after your purchase!
Your Swiss Expertise Team

Secure payment

Secure payment

You can pay by credit card, Maestro, Sofortüberweisung, Google Pay, Apple Pay, Twint and prepayment. Your payment is always processed via an SSL-encrypted connection.

tuev-sued.jpg

TÜV tested

Our pipe connectors are high quality and TÜV-certified.

architekten_siegel.jpg

Recommended by architects & building designers

Recommended by industry experts and practitioners due to reliable, high-performance quality. For you as a customer, this serves as a guarantee of quality, expertise, and service.

This website uses cookies to provide the best possible experience. More information ...
Loading...
Files are being uploaded, please wait...