Go to the home page
0 CHF 0.00*

Galvanised cast steel pipe connectors 26.9 mm (¾")

A silver-coloured, double metal swivel eye clamps onto a vertical blue tube. Two eyelets offset by 90 degrees: one with a side-mounted locking screw, the other with a round through-hole.
Double swivel eye, 90°, 26.9 mm (¾”)
Similar to Type 36, with two eyelets arranged perpendicular to each other.
Product number 608040B

CHF 5.40*
Detailed view of a galvanised steel joint bracket holding a blue pipe. An Allen screw secures the pipe. Below this is a forked fitting with a round hole for mounting a movable joint.
Articulated bracket 26.9 mm (3/4"), 1 M10x35 screw
1 M10x35 screw. A component of the articulated pipe connector that is not generally used on its own, but in combination with, for example, Type 36.
Product number 608042B

CHF 5.80*
A silver, sturdy joint connects two blue tubes at an adjustable angle. It consists of two parts with an axle, each of which clamps a tube in place using an Allen screw. One tube runs vertically, the other horizontally to the left.
Articulated joint 26.9 mm (¾”), consisting of 1 x 608036B and 1 x 608042B
Consisting of 1 x 608036B and 1 x 608042B. Joint, single. Articulated pipe connector for adjustable angle mounting.
Product number 608044B

CHF 10.00*
A double silver metal joint connects a central blue post to two blue tubes sloping downwards. These are fixed at an adjustable angle using hex socket screws and can be mounted flexibly.
Double joint, 26.9 mm (3/4"), comprising 1 x 608038B and 2 x 608042B, incl. 2 M8x35 screws
Consisting of 1 x 608038B and 2 x 608042B Articulated pipe connector for adjustable angle mounting on both sides of the post.
Product number 608046B

CHF 17.50*
A double joint made of grey metal connects three blue tubes. One vertical tube runs through the central clamp, whilst two others are attached at the sides via movable joints: one horizontally, one sloping downwards.
Double joint, 90°, 26.9 mm (¾”), comprising 1 x 608040B and 2 x 608042B, incl. 2 M8x35 screws
consisting of 1 x 608040B and 2 x 608042BArticulated pipe connector for the adjustable angle mounting of corner posts.
Product number 608048B

CHF 17.40*
Adjustable angle joint consisting of two connected parts: at the front, a silver-grey connector for a horizontal and a vertical blue tube; at the rear, a white extension. All tubes are secured with Allen screws, allowing for flexible angle adjustment.
Angle joint, adjustable 1 pair = 2 pieces 26.9 mm (¾”)
ALWAYS 2 PARTS MAKE ONE CONNECTOR! ENTER DOUBLE THE QUANTITY
Product number 608049B

CHF 5.70*
A grey articulated base enclosing a blue rod, positioned diagonally on a white background. It consists of a cylindrical holder and a flat, rectangular mounting plate with two drill holes, connected by a hinge.
Articulated base 26.9 mm (¾”), comprising 1 x 608050 and 1 x 608042B, incl. 1 M10x35 screw
consisting of 1 x 608050 and 1 x 608042BUsed for angled wall mounting or as a support for a support post.
Product number 608051B

CHF 15.20*
A silver-coloured, cylindrical eyelet with a rough surface, clamped firmly around a vertical, smooth, shiny blue tube. On the left, a flat single tab with a circular hole protrudes. Tube connector for panel mounting.
Eyelet section with single tab 26.9 mm (¾”)
Pipe connector for panel mounting.
Product number 608055B

CHF 6.00*
Grey pipe clamp with double bracket: secures a blue pipe via a hex screw. Two flat brackets, each with a mounting hole.
Eyelet section with double tab 26.9 mm (¾”)
Panel mounting tube connector with two eyelets; also used for locking gates.
Product number 608056B

CHF 8.10*
A solid grey metal retaining ring clamps around a vertical blue tube at the centre. On the side is a clearly visible hexagon bolt for secure fastening to the tube. The ring increases friction and prevents slipping.
Adjustment ring, retaining ring 26.9 mm (¾”)
Support tube connector for increasing the sliding resistance of heavily loaded tube connectors.
Product number 608060B

CHF 2.20*
A silver-coloured adjustment ring with a sturdy, right-facing hook is clamped centrally around a vertical blue tube. The tube connector is used to securely attach chains or similar items to tubes and has a rough metal surface.
Adjustable ring with hook 26.9 mm (¾”)
Pipe connector for chain fastenings.
Product number 608061B

CHF 3.60*
A grey, sturdy adjustable ring eye pipe connector firmly attached to a blue pipe. It wraps around the pipe; a visible screw secures it in place. On the left, an open eyelet for attaching further elements. The metal has a slightly rough finish.
Adjustment ring, 26.9 mm (¾”)
Internal hinge pipe connector, for Type 63.
Product number 608062B

CHF 4.50*
A grey, sturdy adjustment ring pin, a pipe connector, is clamped around a vertical blue pipe. The external hinge pipe connector has a cylindrical rod protruding upwards and a fixing screw on the side to tighten it.
Adjustment ring pin. 26.9 mm (¾”)
External hinge pipe connector, for use in combination with Type 62.
Product number 608063B

CHF 6.30*
A sturdy silver metal spacer ring with a polished finish, clamped securely around a blue tube. A downward-curving hook is integrated at the bottom; it is sturdy and suitable for hanging. For tubes with a diameter of 26.9 mm (¾ inch).
Adjustable ring with hook 26.9 mm (¾”)
Similar to tube connector Type 61, particularly suitable for the construction of coat stands and similar items.
Product number 608064B

CHF 3.60*
A silver, U-shaped grille bracket connects a dark blue grille to a round, blue metal post. The bracket encircles the post and is securely fastened to the grille with a screw.
Mesh holder, single 26.9 mm (¾”)
Single-sided wire mesh clamp
Product number 608070B

CHF 2.80*
A galvanised double mesh holder, a double-sided wire mesh clamp, is mounted centrally on a vertical blue post. It secures two dark wire meshes on both sides and is fastened with two screws.
Mesh holder, double. Double-sided wire mesh clamp 26.9 mm (3/4").
Double-sided wire mesh clamp
Product number 608071B

CHF 3.60*
A short silver metal T-piece connects a horizontal pipe to a vertical pipe. Both blue pipes are secured with grub screws. The horizontal pipe is thicker than the vertical one (unequal diameters). Rough surface: galvanised steel.
T-piece combination size horizontal 26.9 mm (3/4”) – vertical 33.7 mm (1”)
Short combination T-piece. Same as Type 2, but this version is used to connect pipes of different diameters to one another.
Product number 608002CB

CHF 6.00*
Sturdy, silver-coloured angle connector with a rough cast finish, connecting two blue tubes: one pointing vertically upwards, the other diagonally downwards to the right. Adjustable angle, two Allen screws for fixing.
T-piece, short, adjustable 30°–60°, 26.9 mm (1”)
This adjustable angle connector is used to join tubes at angles between 30° and 60°. Suitable for diagonal connections, struts and an angled handrail connection to vertical posts on staircases.
Product number 608007B

CHF 6.90*
Grey metal articulated foot holder with a rectangular mounting plate and two drill holes for secure wall or floor mounting. An eyelet with a hole in the centre serves as a movable pivot point. Matt, textured finish.
Articulated foot bracket (Unimass)
For fixing structures to walls or floors, usually in conjunction with Type 42.
Product number 608050

CHF 7.40*
Silver-coloured L-shaped pipe connector that joins two blue pipes at a 90-degree angle. The metal elbow has a rough surface and several hex socket screws for securing. Three openings.
Eaves elbow 26.9 mm (½”).
This pipe connector is required for roof structures, usually in combination with type 91.
Product number 608085B

CHF 13.45*
Grey, cross-shaped metal pipe connector, connects four blue pipes at a 90° angle. The pipes fit securely into the openings and are secured with hexagon head screws. For stabilising structures, e.g. eaves top piece.
Eaves cap 26.9 mm (3/4”)
This pipe connector is required for roof structures, usually in combination with Type 85.
Product number 608091B

CHF 11.60*
Round, black plastic plug with a slightly textured, matt front. Sides with concentric grooves for a secure fit in thick-walled pipes or openings. For sealing pipe ends.
Plug, black plastic, 26.9 mm (¾”)
Plastic cap for sealing the pipe end.
Product number 608074B

CHF 1.70*
A black, L-shaped Allen key for pipe connectors of sizes B and C lies on a white background. Below is a table showing the key types 608075A, 608075BC, 608075DEF, their corresponding sizes (A, B/C, D/E/F) and weights.
Allen key for pipe connectors For B / C
For sizes B / C (size B: 3/4" = 26.9 mm) (size C: 1" = 33.7 mm)You only need a simple Allen key to assemble our pipe connectors. Available in various inch sizes.
Product number 608075BC

CHF 7.35*
A transparent plastic bag filled with lots of grey plastic screw caps. Each cap has a flat, round top and a cylindrical insert. The grey caps are evenly distributed.
Plastic screw cap grey for B / C
25 pieces per bag
Product number 608078BC

CHF 14.70*
Swiss Specialist Retail

Swiss Specialist Retail

Here you will receive expert advice, customer-focused solutions and genuine specialist expertise. Reliable service is guaranteed, even after your purchase!
Your Swiss Expertise Team

Secure payment

Secure payment

You can pay by credit card, Maestro, Sofortüberweisung, Google Pay, Apple Pay, Twint and prepayment. Your payment is always processed via an SSL-encrypted connection.

tuev-sued.jpg

TÜV tested

Our pipe connectors are high quality and TÜV-certified.

architekten_siegel.jpg

Recommended by architects & building designers

Recommended by industry experts and practitioners due to reliable, high-performance quality. For you as a customer, this serves as a guarantee of quality, expertise, and service.

This website uses cookies to provide the best possible experience. More information ...
Loading...
Files are being uploaded, please wait...