Galvanised cast steel pipe connectors 26.9 mm (¾")

Short T-piece 26.9 mm (¾”)
For creating a vertical connection between two pipes. Upper pipe connector for straight and horizontal railing posts. This pipe connector cannot be used to connect a horizontal pipe within the pipe connector.
Product number 608002B

CHF 5.40*
T-piece, short 45° 26.9 mm (¾”)
Creates a connection between two pipes at a 45° angle.
Product number 608003B

CHF 7.80*
T-piece, long 26.9 mm (¾”)
Similar to Type 2. This pipe connector can be used when a connection point is required in a horizontal pipe.
Product number 608004B

CHF 9.20*
90° elbow 26.9 mm (¾”)
Elbow connector for use as an end pipe connector for the upper railing element.
Product number 608006B

CHF 6.90*
Extension piece, external diameter 26.9 mm (¾”)
Connecting clamp for pipes of the same diameter. Not suitable for heavy vertical loads.
Product number 608008B

CHF 7.10*
Extension piece, internal 26.9 mm (¾”)
A streamlined flush connection between two pipes of the same size. The wall thickness must be 3.2 mm. Do not apply direct load to this connection.
Product number 608009B

CHF 4.00*
Base plate, round 26.9 mm (¾”)
This tube connector is used in structures where positional fixing is required. Do not use as a base flange to support guardrails or similar systems.
Product number 608010B

CHF 7.50*
Round base plate, solid 26.9 mm (¾”)
This tube connector is suitable for structures where the tube must pass through. Suitable for use with, for example, intermediate planks.
Product number 608010TB

CHF 6.10*
Base plate, square, solid 26.9 mm (¾”)
This tube connector is used in structures where positional fixing is required. Do not use as a base flange to support guardrails or similar systems.
Product number 608011B

CHF 7.60*
Base plate, oval 26.9 mm (¾”)
Strong base plate for supporting vertical posts. Vertical wide ribs with two adjusting screws increase the strength of the tube connector. The fixing holes in the base flange should be appropriate for the load applied.
Product number 608012B

CHF 12.20*
Round base plate with insert (SET) 26.9 mm (¾”)
Product number 608015B

CHF 17.10*
90° three-way corner fitting 26.9 mm (¾”)
Corner connector (90°) for upper railing corner pieces and all other rectangular systems.
Product number 608018B

CHF 9.10*
90° corner joint, straight, 26.9 mm (¾”)
Used as a counterpart to Type 18; the pipe fits through the connector.
Product number 608020B

CHF 7.00*
Cross piece, solid 26.9 mm (¾”)
90° connecting clamp between the central element and the post on railings.
Product number 608022B

CHF 7.20*
T-piece for support tube 26.9 mm (¾”)
3-way connector for fixing supports with 3 horizontal tubes arranged vertically to one another. The support tube fits through the connector.
Product number 608024B

CHF 8.90*
Cross piece for 26.9 mm (¾") support tube
4-way connector for securing supports with 4 horizontal tubes arranged perpendicular to one another. The support tube fits through the connector.
Product number 608026B

CHF 13.40*
Cross-piece, offset, 90° 26.9 mm (3/4")
The cross-connection clamp (90°) is used for long pipe intersections with supports, reducing cutting costs and increasing the strength of the system whilst maintaining the continuity of the pipe used.
Product number 608028B

CHF 6.50*
Cross T-piece, combined 26.9 mm (¾”)
Frequently used for truss structures. The opening in the support can be adjusted to suit the intended application. For shelving trusses, the outer opening is in the support, whilst for pallet racks, the support is located inside the load-bearing elements.
Product number 608030B

CHF 7.50*
Open T-piece 26.9 mm (¾”)
For the extension and modification of existing structures.
Product number 608032B

CHF 7.10*
Cross piece, open. 90°, 26.9 mm (¾”)
Cross-connection clamp as an addition to an existing structure.
Product number 608033B

CHF 6.60*
Handrail bracket 26.9 mm (¾”)
For fixing handrails and structures to the wall.
Product number 608034B

CHF 8.10*
Handrail bracket, open 26.9 mm (¾”)
For fixing handrails and structures to the wall.
Product number 608035B

CHF 9.60*
Articulated eye 26.9 mm (¾”)
For use with Type 42 articulated tube connectors, as well as for fixing panels and boards.
Product number 608036B

CHF 4.00*
Double swivel eye, 26.9 mm (¾”)
Similar to Type 36, with two eyes on the same axis (180°).
Product number 608038B

CHF 5.60*
Swiss Specialist Retail

Swiss Specialist Retail

Here you will receive expert advice, customer-focused solutions and genuine specialist expertise. Reliable service is guaranteed, even after your purchase!
Your Swiss Expertise Team

Secure payment

Secure payment

You can pay by credit card, Maestro, Sofortüberweisung, Google Pay, Apple Pay, Twint and prepayment. Your payment is always processed via an SSL-encrypted connection.

tuev-sued.jpg

TÜV tested

Our pipe connectors are high quality and TÜV-certified.

architekten_siegel.jpg

Recommended by architects & building designers

Recommended by industry experts and practitioners due to reliable, high-performance quality. For you as a customer, this serves as a guarantee of quality, expertise, and service.

Loading...
Files are being uploaded, please wait...