Go to the home page
0 CHF 0.00*

25 mm square tube connectors

Sturdy, galvanised corner connector for 25 mm square tubes, suitable for 90° connections. Features three visible hexagon head screws for secure tube fastening and an additional round side hole. Matt metal finish.
Corner connector for continuous upright with flange – 25 mm. Corner connector (90°)
Corner piece for continuous upright with flange – 25 mm. Corner connector (90°). With the option to connect a vertical tube at a right angle.
Product number 608021S-25

CHF 8.45*
Grey, square base plate made of galvanised metal for 25 mm square tubes, shown close-up. A tube is inserted into it, secured with a side-mounted Allen screw. Four rounded corners with fixing holes, rough matt finish.
Square base plate, for square tubes – 25 mm
Square base plate – 25 mm. For use in erecting a structure. Not suitable for railings or similar safety structures.
Product number 608011S-25

CHF 6.95*
Galvanised extension piece for square tubes (25 mm), front-facing. External connecting clamp for joining. Visible: two round grub screws with hex sockets on the sides. Surface: rough, with a metallic sheen.
Extension piece external, for square tubes – 25 mm
Extension piece, external. Connecting clamp for pipes of the same diameter. Not suitable for heavy vertical loads.
Product number 608008S-25

CHF 8.75*
Sturdy, silver metal T-joint connecting three square tubes: two horizontally, one vertically downwards. Three hex socket screws secure the tubes firmly in place. Slightly textured, matt finish.
T-piece, long for square tubes – 25 mm
T-piece, long. Similar to type 608002S-25. This pipe connector can be used when a connection point is required in a horizontal pipe.
Product number 608004S-25

CHF 11.90*
Galvanised T-piece connects two square tubes: one runs horizontally through the upper opening, the second is inserted vertically into the lower socket. Two front Allen screws secure 25 mm tubes.
T-piece, short, for square tubes – 25 mm
For vertical connection of two pipes. The connector cannot be used for a horizontal connection of two pipes within the connector itself.
Product number 608002S-25

CHF 6.95*
Close-up of a grey, metallic elbow joint connecting two square tubes at a 90-degree angle. Sturdy connector with a rough surface and visible Allen screws for securing 25 mm tubes.
90° elbow, right-angled, for square tubes – 25 mm
For square tubes, for right-angled connections.
Product number 608006S-25

CHF 9.40*
Sturdy, galvanised three-way elbow for square tubes, which holds three 25 mm square tubes in right-angled 90-degree joints. Tubes are securely fastened with visible hexagon head bolts.
Three-way elbow – 90° for square tubes – 25 mm
For double right-angle connections.
Product number 608018S-25

CHF 12.05*
Grey, galvanised corner piece connects three square metal tubes (25 mm) at right angles: two tubes run horizontally, a third is inserted vertically from above. Each connection is secured with an Allen screw.
Corner connector for continuous uprights for square tubes – 25 mm
Corner connector (90°). With the option to connect a vertical tube at a right angle.
Product number 608020S-25

CHF 9.80*
Silver, solid metal cross-piece for square tubes. With three hex socket screws at the top for fixing and two rectangular side openings for connecting tubes, ideal for railing constructions.
Cross piece, through-type for square tubes – 25 mm
Connecting clamp between the central element and the support on railings.
Product number 608022S-25

CHF 8.00*
Silver-grey metal T-joint with square tube openings. 3-way connector for 25 mm square support tubes with several hex socket screws for fastening. For three horizontal tubes and one continuous support tube.
T-piece for support tubes for square tubes – 25 mm
3-way connector for fixing supports with 3 horizontal tubes arranged vertically to one another. The support tube fits through the connector.
Product number 608024S-25

CHF 9.95*
Sturdy, galvanised handrail bracket for 25 mm square tubing, provides a secure grip. U-shaped, tightened with an Allen screw. Flat mounting plate at the bottom with two holes for wall or railing mounting.
Handrail bracket for square tubes – 25 mm
For fixing railings and for wall mounting.
Product number 608034S-25

CHF 5.15*
Detailed view of a robust, galvanised tube connector for panel mounting on approx. 25 mm square tubing. U-shaped, enclosing the tube, secured at the top with an Allen screw. Flat base at the bottom with a round hole.
Pipe connector for panel mounting for square tubes - 25 mm
Pipe connector for panel mounting.
Product number 608055S-25

CHF 4.70*
Sturdy, silver metal connector with four square openings facing in all directions. Slightly textured surface with small irregularities, giving a rough, galvanised appearance. Shown as a cross-piece for profile tubes, against a white background.
Cross piece for support tubes for square tubes - 25 mm
Cross piece for support tube. 4-way connector for securing supports with 4 horizontal tubes arranged perpendicular to one another. The support tube fits through the connector.
Product number 608026S-25

CHF 13.70*
Sturdy metal corner connector with a rough, grey finish, connecting three square hollow sections at right angles: one upwards, one downwards, one to the side. Features countersunk Allen screws, slightly uneven.
90° cross connector for 25 mm square tubes
This cross connector enables a 90° connection between continuous pipes and supports without the need to cut the pipes. This reduces cutting costs and significantly increases the stability of the structure thanks to the continuity of the pipes.
Product number 608028S-25

CHF 3.15*
Galvanised eyelet fitting with a 25 mm square socket for square tubes. Allen screw at the top for securing the tube. Flat double tabs on the left and right, each with a mounting hole for fixing to a panel. '46' on the inside. Matt grey.
Eyelet fitting with double tab for square tubes - 25 mm
Eyelet fitting with double tab – 25 mm. Pipe connector for panel mounting.
Product number 608056S-25

CHF 3.75*
A silver, textured metal pipe joint connects two square metal profiles. One vertical profile is fixed to the joint, whilst the other extends diagonally downwards to the left. Visible screws allow for variable angle adjustment.
Single joint simple for square tubes – 25 mm
Simple joint for square tubes.Pipe joint connector for an adjustable angle connection between two pipes. The pipe connectors are fitted with black-coloured screws with a serrated edge, ensuring a secure clamp and a uniform appearance. This swivel joint enables flexible connections in variable structures, for example in adjustable frames, racks or partitions. It is available in silver and black and can therefore be visually adapted to existing tube systems.
Product number 608044S-25

CHF 12.60*
Grey metallic connector with a rectangular base and a blocky body, featuring a U-shaped fork with a round hole at the top. On the side, a screw with a white hexagonal head. Rough, textured surface, likely cast or galvanised.
Articulated bracket for square tubes for 25 mm –
Female connector for square tubes, in 25 mm and 40 mm.This connector enables a sturdy right-angled connection of square tubes and is ideal for frame and rack constructions. It is available in silver and black finishes, allowing it to be visually adapted to existing systems.
Product number 608042S-25

CHF 7.15*
Silver-grey, galvanised metal hook holder with a sturdy, rectangular top and a square cut-out. Threaded connection at the top, with the number ‘25’ stamped on the inside. Below this is a solid hook bent to the right. Rough industrial finish.
Adjustable ring with twisted hook for square tubes – 25 mm
Adjustable ring with twisted hook – 25 mm.This spacer ring with a hook twisted by 90° is primarily used in the construction of coat stands and similar tubular structures. It can be flexibly positioned on the tube and offers a practical hanging option for clothing and accessories.
Product number 608064S-25

CHF 4.70*
Silver, robust cross connector for square tubes with a vertical column, featuring two flat arms on the sides with fixing holes. A hexagonal fastener is visible on one arm. Surface slightly rough, galvanised.
Eyelet part with double bracket 90° for square tubes - 25 mm
Eyelet bracket with double tab 90° – 25 mm.This component serves as a double-panel mounting to support two shelves at a 90° angle. It enables a sturdy and space-saving connection of two storage levels to a tubular structure.
Product number 608057S-25

CHF 4.35*
Grey metal connector for square tubes, rough finish, on a white background. With tube opening, side tab with hole and hexagon screw for fixing.
Swivel eye for square tubes – 25 mm
Swivel eye.Suitable for mounting on tubular structures and for securely fastening panels and boards.
Product number 608036S-25

CHF 4.70*
Swiss Specialist Retail

Swiss Specialist Retail

Here you will receive expert advice, customer-focused solutions and genuine specialist expertise. Reliable service is guaranteed, even after your purchase!
Your Swiss Expertise Team

Secure payment

Secure payment

You can pay by credit card, Maestro, Sofortüberweisung, Google Pay, Apple Pay, Twint and prepayment. Your payment is always processed via an SSL-encrypted connection.

tuev-sued.jpg

TÜV tested

Our pipe connectors are high quality and TÜV-certified.

architekten_siegel.jpg

Recommended by architects & building designers

Recommended by industry experts and practitioners due to reliable, high-performance quality. For you as a customer, this serves as a guarantee of quality, expertise, and service.

This website uses cookies to provide the best possible experience. More information ...
Loading...
Files are being uploaded, please wait...