Go to the home page
0 CHF 0.00*

Aluminium pipe connectors 30 mm

Silver-coloured aluminium tube connector, 30 mm, connects three bright yellow tubes in a Y-shape: one vertical tube with two angled tubes at 45 and 135 degrees. Clamped with hex socket screws. Smooth metal surface.
Tube connector aluminium 30mm
The tube connector joins two tubes at a 45° and a 135° angle. By clamping two half-shells together, a tube end and a through-tube are connected. The tubes are each drilled twice with Ø 9.0mm hole.
Product number 40-30

CHF 30.40*
A grey metal fitting connecting two yellow pipes at an angle can be seen in the foreground. The matt finish reflects little light and reveals details such as fixing screws. The pipes run diagonally.
Aluminium joint elbow 30mm
Product number 25-30

CHF 42.30*
A grey, matt-finish aluminium tube connector encircles a bright yellow, cylindrical 30mm tube vertically. The connector has a visible clamping gap and two fixing holes in the triangular mounting surface.
Aluminium support pipe 30mm
The pipe connector joins a pipe parallel to the mounting surface. The slotted pipe holder clamps the pipe end within the pipe connector. The pipe end is drilled twice with a Ø 9.0mm hole.
Product number 7008-30

CHF 38.40*
Silver wall/floor/ceiling mount made of aluminium holds a vertical, bright yellow tube (Ø 30 mm). Oval base with two fixing holes; side-mounted threaded pin secures firmly without drilling. Tube connector.
Wall, floor and ceiling brackets Aluminium 30mm
The tube connector connects a tube vertically to a floor, ceiling or wall surface. The threaded pin clamps the end of the tube in the tube connector. The tube does not need to be drilled.
Product number 12a-30

CHF 11.70*
A shiny, silver aluminium pipe bracket that securely encloses a bright yellow, cylindrical pipe. Two threaded pins on the side for clamping without drilling. Mounting plate with two screw holes.
Aluminium pipe support 30mm
The pipe connector connects a pipe parallel to the mounting surface. The two threaded pins clamp the pipe end within the pipe connector. The pipe does not need to be drilled.
Product number 11a-30

CHF 32.10*
A shiny, grey aluminium double clamp connects two parallel, bright yellow pipes. The sturdy clamp encloses them at the top and bottom, is secured at the front with two screws and holds firmly without drilling.
Double clamp aluminium 30 mm
The pipe connector joins two pipes in parallel. By clamping two half-shells together, two continuous pipes with a centre-to-centre distance of 56mm are connected in parallel. The pipes do not need to be drilled.
Product number 74-30

CHF 26.60*
A shiny silver aluminium wall bracket clamps a vertical yellow tube. The cylindrical bracket is slotted and has an Allen screw that secures the 30 mm tube firmly in place. Close-up image on a white background.
Wall, floor and ceiling brackets Aluminium 30mm
The pipe connector connects a pipe vertically to a floor, ceiling or wall surface. The slotted pipe holder clamps the pipe end within the connector. The pipe end is drilled through to a diameter of 9.0 mm.
Product number 13-30

CHF 9.50*
Silver-coloured aluminium disc holder on a bright yellow tube. It secures a transparent disc between its jaws, held in place by two protruding white plastic screws. Matt finish, tube vertical.
Disc holder Aluminium 30mm
The pipe connector is used as a washer holder. The washers are secured with plastic screws. The pipe connector is screwed or riveted to the pipe. These fasteners are not included in the scope of delivery.
Product number 19-30

CHF 15.80*
Silver aluminium angle bracket connects two yellow cylindrical rods at an angle. Matt finish with visible Allen screw for securing. For tubes with a diameter of 40 mm, angle approx. 150 degrees.
Aluminium elbow 30mm 30°/60°/150°
Product number 32a-30-Wa30-60-150

CHF 22.50*
Close-up of a silver-coloured aluminium floor and ceiling mount for the vertical mounting of a yellow 30mm tube. The tube is clamped in the slotted holder and secured with two Allen screws. Mounting plate with four drill holes.
Floor and ceiling mount, aluminium, 30 mm
The tube connector connects a tube vertically to a floor, ceiling or wall surface. The end of the tube is clamped into the slotted tube holder in the tube connector. The end of the tube is drilled twice with Ø 9.0 mm.
Product number 10-30

CHF 23.40*
Silver aluminium wall, floor or ceiling bracket for 40mm pipes, comprising a yellow vertical pipe. The pipe connector clamps it in place with two half-shells. Secured with an Allen screw. Oval mounting plate with two drill holes.
Wall, floor and ceiling mount, aluminium, 30 mm
The pipe connector connects a pipe vertically to a floor, ceiling or wall surface. By clamping two half-shells together, the pipe end is connected to the pipe connector. The pipe end is drilled once with Ø 9.0 mm hole.
Product number 12-30

CHF 12.10*
Dark grey aluminium T-connector connecting three bright yellow tubes in a 90-degree arrangement. Two tubes are horizontal, whilst a third extends vertically downwards to form a T-shape. Two-piece design, with 3 visible screws.
Aluminium Aluminium T-connector 30mm
The pipe connector joins two pipes at a 90° angle. By clamping two half-shells together, a pipe end and a continuous pipe are joined together to form a T. The pipes do not need to be drilled.
Product number 70-30

CHF 22.10*
A grey aluminium partition wall bracket with a cam encloses a bright yellow cylindrical tube. The cam holds a thin dark green thread, threaded vertically through a slot. Screw fixed to the 30mm tube.
Partition wall bracket with cam aluminium 30 mm
Product number 16N-30

CHF 12.70*
A grey aluminium partition bracket encloses a yellow tube and secures two thin, vertical, greenish partitions on either side. The double bracket is fixed with two screws and clamps the tube securely without drilling, ideal for 40mm tubes.
Partition wall bracket, double aluminium 30mm
The tube connector functions as a double partition wall bracket. By clamping two half-shells together, the tube connector is fixed to the tube and simultaneously clamps two partition walls. The tubes do not need to be drilled.
Product number 16a-30

CHF 19.30*
A matt grey aluminium elbow connects two bright yellow tubes at a 90-degree angle. A silver screw on the outside secures the clamp connection between the two half-shells, enabling the tubes to be assembled without drilling.
Aluminium elbow 90° 30mm
The pipe connector joins two pipes at a 90° angle. By clamping two half-shells together, two pipe ends are joined to form a 90° branch. The pipes do not need to be drilled.
Product number 31-3090

CHF 14.80*
A grey cross connector secures three bright yellow tubes at a 90-degree angle: one tube vertically, two horizontally opposite each other. The two-part connector is fastened with four screws and creates a sturdy, drill-free cross connection.
Cross connector 30mm
The tube connector joins two tube ends and one continuous tube at 90° angles. By clamping two half-shells together, two tube ends and one continuous tube are joined to form a cross. The tubes do not need to be drilled.
Product number 50-30

CHF 20.90*
A grey, T-shaped pipe connector that joins two horizontal yellow pipes to a vertical yellow pipe. The connector is secured with three visible silver screws. The pipes are smooth and bright yellow.
T-connector Aluminium 30mm
The pipe connector joins two pipes at a 90° angle. By clamping two half-shells together, one pipe end and a continuous pipe are joined to form a T. The two pipes are drilled with Ø 9.0 mm.
Product number 72-30

CHF 20.10*
A matt silver, textured aluminium angle bracket from Swissclamp connects two bright yellow tubes at an angle. The robust component is split down the middle and secured with two visible Phillips-head screws.
Aluminium elbow 30 mm 60°/30°/120°
The pipe connector joins two pipes at the desired angle. By clamping two half-shells together, two pipe ends are joined to form a branch. The two pipe ends are drilled through to a diameter of 9.0 mm.
Product number 32-30-Wa60-30-120

CHF 26.00*
A grey aluminium partition bracket encloses a yellow tube and secures two thin, vertical, greenish partitions on either side. The double bracket is fixed with two screws and clamps the tube securely without drilling, ideal for 40mm tubes.
Aluminium partition wall bracket, double with cam 30mm
Product number 16aN-30

CHF 19.30*
Silver-grey aluminium cross connector, connecting five bright yellow tubes. One tube runs vertically through the centre, four extend horizontally at 90° angles. 30mm connector made from clamping half-shells, secured with screws.
Cross connector aluminium 30mm
The tube connector joins five tubes at a 90° angle. By clamping four half-shells, four tube ends and one continuous tube are joined together to form a corner. The four tube ends are drilled through to a diameter of 9.0 mm.
Product number 62-30

CHF 35.10*
A silver-grey ‘ Swissclamp ’ plate support on the bright yellow tube holds a thin, transparent plate securely in place. A screw secures the aluminium support to the tube, emphasising the stability of the 40mm construction.
Plate support aluminium 30mm
The pipe connector is used as a panel support. Thanks to the slotted pipe holder, this pipe connector can be fixed at any position along the pipe. The pipes do not need to be drilled.
Product number 20-30

CHF 16.60*
Close-up of a variable Swissclamp support made from yellow tubing and an aluminium joint. The swivelling joint connects it to a flat base with two screw holes and allows flexible angle adjustment of the 30 mm tube.
Variable support aluminium 30 mm, concave foot
Product number 23a-30

CHF 26.60*
A silver-coloured aluminium T-connector joins two yellow tubes. One tube runs vertically, whilst the other is connected at an angle of approximately 55 degrees. The connector consists of two parts and is secured with two screws.
Aluminium T-connector 30mm, 45° horizontal/45° vertical
Product number 71a-30-Wa45-45

CHF 24.40*
Silver aluminium centre support/tube connector clamps a vertical, bright yellow 40mm tube. Features a slotted mounting surface and a rounded fastening element protruding from the side with a hole for parallel mounting without drilling.
centre support Aluminium 30mm
The tube connector joins a continuous tube parallel to the mounting surface. The slotted tube holder clamps the tube end within the connector. No drilling of the tube is required.
Product number 15-30

CHF 12.00*
Matt grey aluminium floor bearing for 40mm tubes, which securely grips a bright yellow tube. The cylindrical bearing has vertical grooves for clamping. Four fixing holes are visible on the side.
Aluminium support pipe 30mm
The pipe connector joins a pipe parallel to the mounting surface. The slotted pipe holder clamps the pipe end within the pipe connector. The pipe end is drilled twice with a Ø 9.0mm hole.
Product number 11-30

CHF 38.40*
A silver-coloured aluminium end support clamps a yellow tube. The tube connector has a slotted receptacle that encloses the upper end of the tube. A side screw secures the tube; two holes at the top allow for parallel mounting.
End support Aluminium 30mm
The tube connector secures a tube parallel to the screw-on surface. The slotted tube holder clamps the tube end within the tube connector. No drilling of the tube is required.
Product number 14-30

CHF 14.60*
Close-up of a grey aluminium joint for 40mm tubes, firmly connecting two bright yellow cylindrical rods. One rod runs vertically, the other diagonally upwards to the right, securely.
aluminium elbow 30 mm
Product number 26-30

CHF 46.00*
Matt, raw aluminium cross connector with six cylindrical outlets for 30 mm pipes. Sturdy, grey surface with a slight texture. A visible clamping screw at each opening for secure fastening.
Cross connector, 6 outlets, 30mm, raw aluminium,
Enter a product description ...
Product number BR1716b

CHF 23.95*
Close-up of a variable Swissclamp support made from yellow tubing and an aluminium joint. The swivelling joint connects it to a flat base with two screw holes and allows flexible angle adjustment of the 30 mm tube.
Variable aluminium support 30mm, flat base
Product number 23-30

CHF 26.60*
Silver aluminium angle bracket connects two yellow cylindrical rods at an angle. Matt finish with visible Allen screw for securing. For tubes with a diameter of 40 mm, angle approx. 150 degrees.
Aluminium angle bracket 30mm 60°/30°/120°
Product number 32a-30-Wa60-30-120

CHF 22.50*
A silver aluminium swivel joint connects two bright yellow cylindrical rods at right angles. Securely fastened with several screws, it ensures a stable connection for 30mm tubes. The surface is smooth with a slight matt finish.
aluminium swivel bearing 30 mm
Product number 75-30

CHF 99.30*
Swissclamp’s grey corner connector for 35mm tubes joins four yellow tubes at a right angle. The clamp holds the elements firmly together and is secured with two visible screws. Ideal for sturdy modular builds.
angle connector Aluminium 30mm
The tube connector joins two tube ends and a continuous tube at 90° angles. The three threaded pins are used to clamp the single-shell tube connector onto the tubes. The tubes connected to form a cross do not need to be drilled.
Product number 60-30

CHF 24.10*
A silver aluminium tube connector secures two bright yellow tubes. One tube runs vertically through the connector, whilst the second is mounted at a 45-degree angle from top left to bottom right. Fasten with two Allen screws.
Tube connector aluminium 30mm
The pipe connector joins two pipes at a 45° and a 135° angle. By clamping two half-shells together, a pipe end and a continuous pipe are joined. The pipes do not need to be drilled.
Product number 40a-30

CHF 28.50*
Yellow cylinder in a silver, rectangular metal block; two screw heads visible. Knurled knob on the side and threaded rod with a black cap for clamping. Precision tool serving as a 30 mm drilling guide.
drilling guide 30 mm
Product number 80-30

CHF 88.60*
A matt silver, textured aluminium angle bracket from Swissclamp connects two bright yellow tubes at an angle. The robust component is split down the middle and secured with two visible Phillips-head screws.
Aluminium elbow 30mm 30°/60°/150°
The pipe connector joins two pipes at the desired angle. By clamping two half-shells together, two pipe ends are joined to form a branch. The two pipe ends are drilled through to a diameter of 9.0 mm.
Product number 32-30-Wa30-60-150

CHF 28.00*
A grey aluminium partition wall bracket with a cam encloses a bright yellow cylindrical tube. The cam holds a thin dark green thread, threaded vertically through a slot. Screw fixed to the 30mm tube.
Aluminium partition wall bracket 30mm
The pipe connector is used as a partition wall holder. Through the clamping of two half-shells, the pipe connector is fixed to the pipe and simultaneously clamps the partition wall. The pipes do not need to be drilled.
Product number 16-30

CHF 12.70*
Close-up of an aluminium floor and ceiling mount from Swissclamp, which secures a yellow pipe (30 mm) vertically to a surface. The silver component has a round base plate with 4 drill holes and 2 threaded pins.
Floor and ceiling mount, aluminium, 30 mm
The pipe connector connects a pipe vertically to a floor, ceiling or wall surface. The two threaded pins clamp the pipe end within the connector. No drilling of the pipe is required.
Product number 10a-30

CHF 23.20*
Close-up of a grey clamp connecting two bright yellow pipes: one runs horizontally at the top, the other extends vertically downwards at the bottom. The matt metal clamp is secured at the front with two silver screws.
T-connector Aluminium 30mm
The pipe connector joins two pipes at a 90° angle. By clamping two half-shells together, a pipe end and a continuous pipe are joined together to form a T. The pipes do not need to be drilled.
Product number 71-30

CHF 12.90*
Grey universal joint made of raw aluminium with four cylindrical pipe connections, each with a grub screw for fastening. Connects four pipes and is movable at the centre for variable angles. Surface slightly rough, matt.
Universal joint, 30mm, 316g, raw aluminium grub screws, not through-going
For connecting four pipes with four 90° elbows and one adjustable elbow
Product number BR1924B

CHF 35.50*
A matt silver, textured aluminium angle bracket from Swissclamp connects two bright yellow tubes at an angle. The robust component is split down the middle and secured with two visible Phillips-head screws.
Aluminium elbow 30mm 45°/135°
The pipe connector joins two pipes at the desired angle. By clamping two half-shells together, two pipe ends are joined to form a branch. The two pipe ends are drilled through to a diameter of 9.0 mm.
Product number 32-30-Wa45-45-135

CHF 26.00*
Grey aluminium elbow, 90-degree pipe connector, connects two bright yellow pipes at a right angle. Consists of two half-shells, bolted together with four visible screws. Sturdy 90-degree connection for 30mm pipes.
Aluminium elbow 90° 30mm
The pipe connector joins two pipes at a 90° angle. By clamping two half-shells together, the two pipe ends are joined to form a 90° branch. The two pipe ends are drilled through to a diameter of 9.0 mm.
Product number 30-30

CHF 14.80*
A cross connector made of raw aluminium with three visible outlets and a central opening. The surface is matt grey and slightly textured. Four grub screws are visible at the outer ends of the connector for securing tubes or rods.
Cross connector, 3 outlets, 30mm, 220g, raw aluminium, grub screws
Product number BR1716a

CHF 21.85*
Grey aluminium elbow connecting two bright yellow tubes at a 45-degree angle. The connector clamps the tube ends with two half-shells and has a screw on the side for drill-free assembly.
Aluminium elbow 45° 30mm
The pipe connector joins two pipes at a 45° angle. By clamping two half-shells together, two pipe ends are joined to form a 45° branch. The pipes do not need to be drilled.
Product number 31-3045

CHF 23.00*
T-joint connector made from raw, matt silver aluminium for 30mm tubes. Connects three tubes: two fixed at a 90-degree angle and a third outlet with a variable joint angle. Secure with grub screws and a hexagon screw.
T-joint connector, variable, 30mm, raw aluminium, grub screws
Single-shell pipe connector with three outlets for connecting three pipes with two 90° angles and one variable angle.
Product number BR1924

CHF 37.20*
A silver-coloured aluminium cross connector from Swissclamp, which connects two yellow, round rods at a 45-degree angle. The connector is split in the middle and secured with two screws, ensuring a stable connection.
Aluminium cross connector 30mm, 60°/30°
Product number 50a-30-Wa60-30

CHF 31.10*
A pipe support made of raw aluminium for pipes with a diameter of 30 mm. The component has a continuous cylindrical bore and is clamped in place with two screws. Two mounting flanges with holes for assembly are visible on the side.
Pipe support, 30mm, raw aluminium, full-length, drilling required on the pipe
Product number BR1864

CHF 30.10*
Silver aluminium angle bracket connects two yellow cylindrical rods at an angle. Matt finish with visible Allen screw for securing. For tubes with a diameter of 40 mm, angle approx. 150 degrees.
Aluminium elbow 30mm 45°/135°
Product number 32a-30-Wa45-45-135

CHF 22.50*
A silver-grey aluminium plate holder is attached to a bright yellow tube and holds a transparent glass plate horizontally. The slotted tube mount enables easy positioning and secure fastening of the tube connector without drilling.
Panel holder aluminium 30mm
The pipe connector is used as a panel holder. Thanks to the slotted pipe mount, this pipe connector can be fixed at any position along the pipe. The pipes do not need to be drilled.
Product number 21-30

CHF 17.80*
Grey aluminium angle connector joins three yellow tubes at a 90° angle: one tube running vertically through the centre, two branching off horizontally. Polished Swissclamp tube connector, secured with threaded pins, for 40mm tubes.
angle connector Aluminium 30mm
The pipe connector joins three pipes at a 90° angle. The single-shell pipe connector is secured to the two pipe ends and the through-pipe using the three threaded pins. The pipes joined to form a corner do not need to be drilled.
Product number 60a-30

CHF 23.40*
A silver-coloured aluminium T-connector joins two yellow tubes. One tube runs vertically, whilst the other is connected at an angle of approximately 55 degrees. The connector consists of two parts and is secured with two screws.
Aluminium T-connector 30 mm Wa 30°/Wb 60°
Product number 71a-30-Wa30-60

CHF 29.40*
A silver aluminium T-connector joins four bright yellow tubes at a 90° angle. Three horizontal tube ends are clamped together by a continuous vertical tube. The 30mm connector is secured with visible screws.
T-connector Aluminium 30mm
The tube connector joins four tubes at a 90° angle. By clamping three half-shells together, three tube ends and a continuous tube are joined together to form a corner. The three tube ends are drilled through to a diameter of 9.0 mm.
Product number 61-30

CHF 32.10*
A grey aluminium double clamp connects two bright yellow, vertically arranged tubes in parallel. The clamp encloses each 30mm tube with two bolted half-shells and secures them firmly without the need for drilling.
Double clamp aluminium 30 mm
The pipe connector joins two pipes in parallel. By clamping two half-shells together, two continuous pipes with a centre-to-centre distance of 96mm are connected in parallel. The pipes do not need to be drilled.
Product number 73-30

CHF 20.10*
A silver-coloured aluminium cross connector from Swissclamp, which connects two yellow, round rods at a 45-degree angle. The connector is split in the middle and secured with two screws, ensuring a stable connection.
Aluminium cross connector 30mm, angle 30°/60°
Product number 50a-30-Wa30-60

CHF 40.50*
A silver-coloured aluminium T-connector joins two yellow tubes. One tube runs vertically, whilst the other is connected at an angle of approximately 55 degrees. The connector consists of two parts and is secured with two screws.
Aluminium T-connector 30 mm 60° horizontal/30° vertical
Product number 71a-30-Wa60-30

CHF 29.10*
Grey universal joint made of raw aluminium with four cylindrical pipe connections, each with a grub screw for fastening. Connects four pipes and is movable at the centre for variable angles. Surface slightly rough, matt.
Open universal joint, 30mm, 250g, raw aluminium, 4 grub screws, through-type
Product number BR1924F

CHF 35.50*
A silver-coloured aluminium cross connector from Swissclamp, which connects two yellow, round rods at a 45-degree angle. The connector is split in the middle and secured with two screws, ensuring a stable connection.
Aluminium cross connector 30mm 45°/45°
Product number 50a-30-Wa45-45

CHF 27.30*
schweizer_fachhandel_shop.jpg

Swiss specialist retailers

Here you will receive expert advice, customer-focused solutions and genuine specialist expertise. Reliable service is guaranteed, even after your purchase!
Your Swiss Expertise Team

sicher_bezahlen.jpg

Secure payment

You can pay by credit card, Maestro, Sofortüberweisung, Google Pay, Apple Pay, Twint and prepayment. Your payment is always processed via an SSL-encrypted connection.

tuev-sued.jpg

TÜV tested

Our pipe connectors are high quality and TÜV-certified.

architekten_siegel.jpg

Recommended by architects & building designers

Recommended by industry experts and practitioners due to reliable, high-performance quality. For you as a customer, this serves as a guarantee of quality, expertise, and service.

This website uses cookies to provide the best possible experience. More information ...
Loading...
Files are being uploaded, please wait...