Go to the home page
0 CHF 0.00*

Scaffolding clamps 48.3 mm (1½")

Silver-coloured swivel coupling for scaffolding tubes, shown against a white background. Sturdy coupling made of hot-dip galvanised steel with two brackets, quick-release thread and nut (SW 22 mm) on the ball joint, for 48.3 mm tubes.
Rotary coupling B metric, 48.3 mm, SW 22 mm (fine thread)
Application:  Swivel couplings are used as a rotating connection between two scaffolding tubes. The angle between the two tubes can be freely selected. It is important to use only certified couplings to ensure reliable safety and compliance with approval standards. Scaffolding swivel couplings are so popular because they are highly versatile. On most scaffolds, there is a need, for example, to attach scaffold tubes as additional guardrails. The swivel scaffold clamp is also very popular when used as a fixing option for diagonals that are too long.  Material, properties and features: · Steel, drop-forged, hot-dip galvanised, robust design, ribbed  · Quick-connect thread for super-fast installation  · Test mark in accordance with EN 74  · With hot-dip galvanised nut, 19 or 22 mm wrench size  · Nut and hammer-head screw hot-dip galvanised for perfect durability  · Approved as a single coupling for a load of 9.1 kN  · Tightening torque for nuts: 50 Nm.  · With B certificate, for pipe diameter 48.3 mm
Product number 04961

CHF 11.70*
A shiny, silver-coloured scaffolding coupler, presumably a swivel coupler, consisting of two sturdy moulded metal halves with a central pin. One side has a threaded bolt and a hex nut for tightening or loosening. The surface reflects light.
Standard BB coupling, metric, 48.3 mm, SW 22 mm
FV  Standard couplers are used as a rigid connection between two scaffolding tubes. The angle between the two tubes is 90 degrees. It is important to use only certified couplings to ensure reliable safety and compliance with approval standards. Scaffolding couplings are also frequently used for anchoring scaffolding. In this case, the scaffolding clamp is used to secure the steel tube brace (scaffolding anchor) to the scaffolding frame. Material, properties and features: Steel, drop-forged, hot-dip galvanised, robust design, ribbed  Quick-connect thread Test mark in accordance with EN 74 With flanged nuts 19 mm or 22 mm Flange nut and hammer-head screw electro-galvanised Approved as a single coupling for a load of 9.1 kN or as a double coupling for 15.2 kN Tightening torque for flanged nuts: 50 Nm With BB certificate
Product number 04962

CHF 10.25*
Sturdy, silver-coloured screw-on coupling made of hot-dip galvanised steel for permanent mounting on concrete walls or wooden beams. Features a U-shaped clamping piece for scaffolding tubes, a mounting base and two threaded bolts with flanged nuts.
Screw-on coupling, 48.3 mm, SW 22 mm
 FVApplication :The bolt-on coupling can be bolted to a sufficiently solid object (e.g. concrete wall, wooden beam) and then used to connect to a scaffolding tube.  Material, properties and features : · Steel, drop-forged, hot-dip galvanised, robust design, ribbed  · Metric thread  · Welded-in machine screw M 14 x 50 mm  · With flanged nuts, 19 or 22 mm spanner size  · Flanged nut and hammer-head screw, electro-galvanised.
Product number 00465

CHF 17.70*
Hot-dip galvanised half-coupler in a robust design. Grey metal clamp with a shiny finish, U-shaped pipe opening. Tightened with a metric screw and flanged nut for a secure connection. Suitable for scaffolding.
Half-coupling 48.3 mm, SW 22, robust design, hot-dip galvanised
Application :Half-couplings are ultimately half swivel couplings. There is a hole in the coupling base (17 mm diameter) at the swivel joint, so that the coupling can also be bolted on using a flat-head screw.  Material, properties and features: Steel, drop-forged, hot-dip galvanised, robust design, ribbed Metric thread or quick thread (depending on batch) Test mark in accordance with EN 74 With flanged nuts, 19 or 22 mm spanner size Flange nut and hammer-head screw hot-dip galvanised Approved as a single coupling for a load of 9.1 kN Tightening torque of the flanged nuts 50 Nm Additional information and notes :This coupling is also available as separate parts with an unfinished lower section to simplify welding
Product number 00499

CHF 7.40*
Robust standard reducer coupling made of hot-dip galvanised steel with a light-coloured finish. Two clamps of different sizes are connected via a joint and each has a gold-coloured bolt with a hex nut for tightening. Coarsely ribbed.
FV standard reducing coupling, SW 22 mm, 1450 g, 1½" x 2" (48.3 mm x 60.3 mm)
FVApplication: Standard couplings are used as a rigid connection between a scaffolding tube and a tube with a different diameter. The angle between the two tubes is 90 degrees. Reducing standard couplings are characterised by the fact that one side of the scaffolding clamp is optimised for the standard 48.3 mm tube, whilst the other side is designed for a different diameter. Material, properties and features: • Steel, drop-forged, hot-dip galvanised, robust design, ribbed • Metric thread or quick-connect thread (depending on batch) • Collar nut and hammer-head screw electro-galvanised or hot-dip galvanised (depending on batch) Additional information and notes : • If you require larger quantities than those shown as ‘in stock’, please contact us; we can usually assist you • On request, we are also happy to offer further sizes for standard reducing couplings: SW 19 for pipe Ø 48x34 mm SW 19 for pipe Ø 48x38 mm SW 19 For pipe Ø 48x42 mm SW 19 For pipe Ø 48x60 mm SW 19 for pipe Ø 48x76 mm
Product number ST-0009

CHF 19.75*
Electro-galvanised steel reducing swivel coupling with two swivelling clamping jaws. Each clamping jaw has a threaded rod and a hex nut for tightening. Matt metallic yellowish-grey surface, viewed diagonally against a light background.
Reducing swivel coupling, 1½" x 2" (48.3 mm x 60.3 mm), electro-galvanised
Reducing swivel coupling, electro-galvanised steelMixed sizes 48.3 mm – 60.3 mmRemaining stock: 28 pieces
Product number 00141-G

CHF 18.50*
Silver scaffolding coupler for scaffolding, comprising two C-shaped clamp halves connected by a bolt. Each clamp has a spindle screw for clamping pipes. On a white background.
Reducing swivel coupling, 1 1/2" x 2" (48.3 mm x 60.3 mm)
FVApplication:Reducing swivel couplings are used as a rotating connection between a scaffolding tube and a tube with a different diameter. The angle between the two tubes can be freely selected. The different diameter may be smaller or larger than 48.3 mm – in this case, 60 mm. Material, properties and features: • Steel, drop-forged, hot-dip galvanised, robust design, ribbed • Metric thread or quick-connect thread (depending on batch) • With flanged nuts, 19 or 22 mm spanner size. Flanged nut and hammer-head screw electro-galvanised or hot-dip galvanised (depending on batch) Additional information and notes :• If you require larger quantities than those shown as “in stock”, please contact us; we can usually assist you • Upon request, we are also happy to offer you reducing rotary couplings in the following combinations: SW 19 For pipe Ø 48x34 mm SW 19 For pipe Ø 48x38 mm SW 19 For pipe Ø 48x42 mm SW 19 For pipe Ø 48x60 mm SW 19 For pipe Ø 48x76 mm
Product number 00141

CHF 32.70*
Swissclamp ’s polished, silver-coloured cross clamp for joining two components at a 90-degree angle. Features two swivelling clamping halves, securely fastened with threaded bolts and nuts. Ideal for sturdy pipe connections.
Reducing standard coupling, 48.3 mm, x 34 mm
FVApplication:Standard couplings are used as a rigid connection between a scaffolding tube and a tube with a different diameter. The angle between the two tubes is 90 degrees. Reducing standard couplings are characterised by the fact that one side of the scaffolding clamp is optimised for the standard 48.3 mm tube, whilst the other side is designed for a different diameter. Material, properties and features :• Steel, drop-forged, hot-dip galvanised, robust design, ribbed • Metric thread or quick-connect thread depending on batch • With flanged nuts, 19 mm wrench size. Flanged nut and hammer-head screw electro-galvanised or hot-dip galvanised (depending on batch). Additional information and notes:• If you require larger quantities than those shown as “in stock”, please contact us; we can usually assist you • Upon request, we are also happy to offer additional sizes for standard reducing couplings: SW 19 For pipe Ø 48x34 mm SW 19 For pipe Ø 48x38 mm SW 19 For pipe Ø 48x42 mm SW 19 For pipe Ø 48x60 mm SW 19 For pipe Ø 48x76 mm • Upon request, we are also happy to offer you reducing swivel couplings in the following combinations: SW 19 For pipe Ø 48x34 mm SW 19 For pipe Ø 48x38 mm SW 19 For pipe Ø 48x42 mm SW 19 For pipe Ø 48x60 mm SW 19 For pipe Ø 48x76 mm
Product number 00106

CHF 29.70*
Silver scaffolding coupler for scaffolding, comprising two C-shaped clamp halves connected by a bolt. Each clamp has a spindle screw for clamping pipes. On a white background.
Reducing swivel coupling, 48.3 mm x 42.4 mm
FVApplication :Reducing swivel couplings are used as a rotating connection between a scaffolding tube and a tube with a different diameter. The angle between the two tubes can be freely selected. The different diameter may be smaller or larger than 48.3 mm – in this case, 42.4 mm. Material, properties and features: • Steel, drop-forged, hot-dip galvanised, robust design, ribbed • Metric thread or quick-connect thread (depending on batch) • With flanged nuts, 19 or 22 mm spanner size. Flanged nut and hammer-head screw electro-galvanised or hot-dip galvanised (depending on batch) Additional information and notes :• If you require larger quantities than those shown as “in stock”, please contact us; we can usually assist you • Upon request, we are also happy to offer you reducing rotary couplings in the following combinations: SW 19 For pipe Ø 48x34 mm SW 19 For pipe Ø 48x38 mm SW 19 For pipe Ø 48x42 mm SW 19 For pipe Ø 48x60 mm SW 19 For pipe Ø 48x76 mm
Product number 00140

CHF 32.10*
Hot-dip galvanised steel swivel coupling on a white background. Two U-shaped clamps, connected via a central pivot point. Each clamp features a quick-release screw and hex nut for securing to the pipe. Light grey, glossy.
Swivel coupling B, 48.3 mm, SW 22 mm, hot-dip galvanised with quick-thread screw
Application: Swivel couplings are used as a rotating connection between two scaffolding tubes. The angle between the two tubes can be freely selected. It is important to use only certified couplings to ensure reliable safety and compliance with approval standards. Scaffolding swivel couplings are so popular because they are highly versatile. On most scaffolds, there is a need, for example, to attach scaffold tubes as additional guardrails. The swivel scaffold clamp is also very popular when used as a fixing option for diagonals that are too long. Material, properties and features: · Steel, drop-forged, hot-dip galvanised, robust design, ribbed · Quick-connect thread for super-fast installation · Test mark in accordance with EN 74 · With hot-dip galvanised nut 19 or 22 mm wrench size · Nut and hammer-head screw hot-dip galvanised for perfect durability · Approved as a single coupling for a load of 9.1 kN · Tightening torque for nuts: 50 Nm. · With B certificate, for pipe diameter 48.3 mm    
Product number 04961Q

CHF 12.60*
Swissclamp ’s polished, silver-coloured cross clamp for joining two components at a 90-degree angle. Features two swivelling clamping halves, securely fastened with threaded bolts and nuts. Ideal for sturdy pipe connections.
Reducing standard coupling, 48.3 mm x 76.1 mm
FV Application:Standard couplings are used as a rigid connection between a scaffolding tube and a tube with a different diameter. The angle between the two tubes is 90 degrees. Reducing standard couplings are characterised by the fact that one side of the scaffolding clamp is optimised for the standard 48.3 mm tube, whilst the other side is designed for a different diameter. Material, properties and features:• Steel, drop-forged, hot-dip galvanised, robust design, ribbed • Metric thread or quick-connect thread (depending on batch) • Flanged nut and hammer-head screw, electro-galvanised or hot-dip galvanised (depending on batch) Additional information and notes :• If you require larger quantities than those shown as “in stock”, please contact us; we can usually assist you • Upon request, we are also happy to offer additional sizes for standard reducing couplings: SW 19 For pipe Ø 48x34 mm SW 19 For pipe Ø 48x38 mm SW 19 For pipe Ø 48x42 mm SW 19 For pipe Ø 48x60 mm SW 19 For pipe Ø 48x76 mm
Product number 00111

CHF 32.85*
Hot-dip galvanised steel bracing coupling for 48.3 mm scaffolding tube, U-clamp with threaded bolt/flanged nut SW22, bracing hook welded to the side for façade anchoring.
Bracing coupling, 48.3 mm, SW 22 mm
 FVApplication:Bracing couplers are used to anchor scaffolding to facades or similar structures. They are attached to a scaffold tube via the coupler claw and connected directly to an eye bolt or ring bolt on the other side. Can be used as an alternative to traditional bracing for anchoring. However, the version with the coupler is more flexible and also allows for unconventional anchoring points. Material, properties and features:• Steel, drop-forged, hot-dip galvanised, robust design, ribbed • Metric thread • With welded stiffening hook • With flanged nuts, 19 or 22 mm spanner size. Flanged nut and hammer-head screw electro-galvanised. • Tightening torque for flanged nuts: 50 Nm.
Product number 00445

CHF 17.40*
Silver-coloured SCAFFGUARD metal half-coupler, shown from the side, with a robust cylinder for 48.3 mm tubes and a movable clamping jaw, tensioned by a hexagon bolt and nut. Flat rectangle at the top for attaching aluminium rails.
SCAFFGUARD half-coupler, 48.3 mm, SW 22 mm
For the SCAFFGUARD safety system. For system-independent installation of the  aluminium rails.
Product number 07211

CHF 50.40*
Swissclamp ’s polished, silver-coloured cross clamp for joining two components at a 90-degree angle. Features two swivelling clamping halves, securely fastened with threaded bolts and nuts. Ideal for sturdy pipe connections.
Cross clamp 90°, 2 1/2" - 6/4" (76.1 mm - 48.3 mm)
Minimum order quantity 200 pieces. Lead time approx. 3 monthsCross clamps/standard couplers are used as a rigid connection between two scaffolding tubes. The angle between the two tubes is 90 degrees. It is important to use only certified couplings to ensure reliable safety and compliance with approval standards. Scaffolding couplings are also frequently used for anchoring scaffolding. In this case, the scaffolding clamp is used to secure the steel tube brace (scaffolding anchor) to the scaffolding frame. Material, properties and features: Steel, drop-forged, hot-dip galvanised, robust design, ribbed Quick-connect thread Test mark in accordance with EN 74 With flanged nuts 19 mm or 22 mm Flange nut and hammer-head screw electro-galvanised Approved as a single coupling for a load of 9.1 kN or as a double coupling for 15.2 kNTightening torque for flanged nuts 50 Nm 1920g, FV
Product number GER061-64-f

CHF 36.00*
Swissclamp ’s polished, silver-coloured cross clamp for joining two components at a 90-degree angle. Features two swivelling clamping halves, securely fastened with threaded bolts and nuts. Ideal for sturdy pipe connections.
Reducing standard coupling, 48.3 mm, x 42 mm
 FVApplication: Standard couplings are used as a rigid connection between a scaffolding tube and a tube with a different diameter. The angle between the two tubes is 90 degrees. Reducing standard couplings are characterised by the fact that one side of the scaffolding clamp is optimised for the standard 48.3 mm tube, whilst the other side is designed for a different diameter. Material, properties and features: • Steel, drop-forged, hot-dip galvanised, robust design, ribbed • Metric thread or quick-connect thread (depending on batch) • Flanged nut and hammer-head screw, electro-galvanised or hot-dip galvanised (depending on batch) Additional information and notes : • If you require larger quantities than those shown as “in stock”, please contact us; we can usually assist you • We are also happy to offer further sizes for standard reducing couplings on request: SW 19 For pipe Ø 48x34 mm SW 19 For pipe Ø 48x38 mm SW 19 For pipe Ø 48x42 mm SW 19 For pipe Ø 48x60 mm SW 19 For pipe Ø 48x76 mm
Product number P-0040

CHF 19.60*
Silver scaffolding coupler for scaffolding, comprising two C-shaped clamp halves connected by a bolt. Each clamp has a spindle screw for clamping pipes. On a white background.
Reducing swivel coupling, 48.3 mm x 34 mm
 FVApplication :Reducing swivel couplings are used as a rotating connection between a scaffolding tube and a tube with a different diameter. The angle between the two tubes can be freely selected. The different diameter can be smaller or larger than 48.3 mm – in this case 34 mm. Material, properties and features :• Steel, drop-forged, hot-dip galvanised, robust design, ribbed • Metric thread or quick-connect thread (depending on batch) • With flanged nuts, 19 or 22 mm spanner size. Flanged nut and hammer-head screw electro-galvanised or hot-dip galvanised (depending on batch) Additional information and notes:• If you require larger quantities than those shown as “in stock”, please contact us; we can usually assist you • Upon request, we are also happy to offer you reducing rotary couplings in the following combinations: SW 19 For pipe Ø 48x34 mm SW 19 For pipe Ø 48x38 mm SW 19 For pipe Ø 48x42 mm SW 19 For pipe Ø 48x60 mm SW 19 For pipe Ø 48x76 mm
Product number 00138

CHF 31.20*
Shiny, silver-coloured pipe connector with a vertical pipe spigot and half-coupling. Upper cylindrical section is smooth with a hole on the side. Lower open clamp with a visible screw for attachment to pipes/beams.
Pipe connector with half-coupling, 48.3 mm, SW 22 mm
Universally applicable. For the installation of vertical frames, module stands or scaffolding tubes on, for example, lattice girders, triangular supports, vertical  scaffolding tubes, etc. Connection via standard scaffolding couplers and connection  via standardised pipe sockets.
Product number 00471

CHF 34.50*
Swissclamp ’s polished, silver-coloured cross clamp for joining two components at a 90-degree angle. Features two swivelling clamping halves, securely fastened with threaded bolts and nuts. Ideal for sturdy pipe connections.
Reducing standard coupling, 48.3 mm x 38 mm
 FVApplication: Standard couplings are used as a rigid connection between a scaffolding tube and a tube with a different diameter. The angle between the two tubes is 90 degrees. Reducing standard couplings are characterised by the fact that one side of the scaffolding clamp is optimised for the standard 48.3 mm tube, whilst the other side is designed for a different diameter. Material, properties and features: • Steel, drop-forged, hot-dip galvanised, robust design, ribbed • Metric thread or quick-connect thread (depending on batch) • Flanged nut and hammer-head screw, electro-galvanised or hot-dip galvanised (depending on batch) Additional information and notes : • If you require larger quantities than those shown as “in stock”, please contact us; we can usually assist you • We are also happy to offer further sizes for standard reducing couplings on request: SW 19 For pipe Ø 48x34 mm SW 19 For pipe Ø 48x38 mm SW 19 For pipe Ø 48x42 mm SW 19 For pipe Ø 48x60 mm SW 19 For pipe Ø 48x76 mm
Product number 00107

CHF 29.70*
Shiny, hot-dip galvanised steel beam coupler on a white background. Upper bracket for attaching to steel structures; lower semi-circular section secures scaffolding tube (48.3 mm). Bolt with flanged nut (SW 22 mm).
Beam coupling 48.3 mm, 22 mm
FVApplication :The beam coupler is a half-coupler with a welded steel bracket, designed for suspending scaffolding tubes from steel structures (T-beams, double-T-beams, I-beams, etc.).   Material, properties and features :• Steel, drop-forged, hot-dip galvanised, robust design, ribbed • Metric thread or quick-connect thread (depending on batch) • With flanged nuts with a 19 or 22 mm wrench size. Flanged nut and hammer-head screw electro-galvanised or hot-dip galvanised.   Additional information and notes:   • 9 kN permissible slip load • Install in pairs • Tightening torque of the flanged nut 50 Nm
Product number 00454

CHF 21.90*
Hot-dip galvanised steel wall-to-ceiling coupler. L-shaped flange with two fixing holes. Two sturdy clamps with collar nuts and bolts at the front, for secure attachment of 48.3 mm scaffolding tubes to walls/ceilings.
Wall-ceiling coupler 48.3 mm, SW 22 mm
 FV Application: The wall-to-ceiling coupler is a universal fastening element for all scaffolding components with a tube diameter of 48.3 mm. This coupler can be used to attach both non-system scaffolding tubes and lattice girders, as well as frame or modular scaffolding uprights, to load-bearing structures or buildings. The WD coupling always allows for flexible fastening – ideal where space is limited. It is also extremely robust. It can accommodate loads both in the direction of the pipe axis and perpendicular to it. The WD coupling can be subjected to both tensile and compressive stresses. The angled design allows for installation with the head facing outwards or with the flange side facing the wall. Material, properties and features: · Steel, drop-forged, hot-dip galvanised, robust design, ribbed · Metric thread · With flanged nuts, 19 or 22 mm spanner size · Flanged nut and hammer-head screw electro-galvanised · Dimensions: 100 x 109 x 150 mm · max. slip load +/- 9.09 kN resulting anchor load at max. load: D = Z = 16.00 kN, V = 6.5 kN in reinforced concrete · max. head pull-out load +/- 17 kN resulting anchor load: 8.5 kN · Weight: 4.4 kg     
Product number 07214

CHF 63.00*
Robust, hot-dip galvanised steel tilt-pin coupling, with side detailing. Open clamping mechanism, held in place by a metric threaded rod with a flanged nut. Welded cylindrical tilt pin with a flat tip for scaffolding attachment.
Tilt-pin coupling, 48.3 mm, SW 22 mm
 FV Application:A tilt pin coupling can be used to flexibly attach scaffolding components with a tilt pin receptacle (hole for tilt pin). It positions a tilt pin at the desired location.  Material, properties and features:• Steel, drop-forged, hot-dip galvanised, robust design, ribbed • Metric thread • With welded tilt pin • With flanged nuts, 19 or 22 mm spanner size. Flanged nut and hammer-head screw electro-galvanised. • Tightening torque for flanged nuts: 50 Nm.
Product number 00448

CHF 16.50*
Hot-dip galvanised steel square bar coupler with an L-shaped mounting bracket featuring four drill holes. Below this is a swivel pipe clamp for 48.3 mm scaffolding tubes, secured with a bolt and flanged nut. Sturdy, slightly textured surface.
Square tube coupler, swivel, 48.3 mm, SW 22 mm
FVApplication:The square timber coupling is used to connect a square timber to a scaffolding tube. The coupling can be rotated 360 degrees around the central axis on the angle bracket. The steel angle bracket has a leg length of 8 or 10 cm. The entire component is hot-dip galvanised. Material, Properties and Features • Steel, drop-forged, hot-dip galvanised, robust design, ribbed • Metric thread or quick-connect thread (depending on batch) • With flanged nuts, 19 or 22 mm spanner size. Flanged nut and hammer-head screw electro-galvanised.  • The coupling is optimised for pipes with a diameter of 48.3 mm and can withstand loads of up to 0.9 kN
Product number 00451

CHF 34.50*
Sturdy, silver-coloured parallel coupler made of hot-dip galvanised steel: two C-shaped clamps with a collar nut and threaded screw. Connected by a solid, rectangular centre strut, ideal for connecting 48.3 mm pipes/system uprights in parallel.
Parallel coupling, 48.3 mm, SW 22 mm
 FVApplication :The parallel coupler is used to connect different system stands to one another or non-system scaffolding tubes in a force-fit manner in a parallel direction, taking into account the design-related conditions.  Material, properties and features: · Steel, drop-forged, hot-dip galvanised, robust design, ribbed  · Metric thread or quick-release thread (depending on batch)  · With flanged nuts, 19 or 22 mm wrench size. Flanged nut and hammer-head screw electro-galvanised.  Additional information and notes:  Centre distance: 180 mm
Product number 01512

CHF 32.70*
Silver scaffolding coupler for scaffolding, comprising two C-shaped clamp halves connected by a bolt. Each clamp has a spindle screw for clamping pipes. On a white background.
Reducing swivel coupling, 48.3 mm x 76.1 mm
FV Application :Reducing swivel couplings are used as a rotating connection between a scaffolding tube and a tube with a different diameter. The angle between the two tubes can be freely selected. The different diameter may be smaller or larger than 48.3 mm – in this case, 76 mm. Material, properties and features :• Steel, drop-forged, hot-dip galvanised, robust design, ribbed • Metric thread or quick-connect thread (depending on batch) • With flanged nuts, 19 or 22 mm spanner size. Flanged nut and hammer-head screw electro-galvanised or hot-dip galvanised (depending on batch)  Additional information and notes :• If you require larger quantities than those shown as “in stock”, please contact us; we can usually assist you • Upon request, we are also happy to offer you reducing rotary couplings in the following combinations: SW 19 For pipe Ø 48x34 mm SW 19 For pipe Ø 48x38 mm SW 19 For pipe Ø 48x42 mm SW 19 For pipe Ø 48x60 mm SW 19 For pipe Ø 48x76 mm
Product number 00142

CHF 33.45*
Robust, hot-dip galvanised steel pull coupling for metric scaffolding tubes. Consists of two semi-circular clamping elements, connected by threaded bolts and flanged nuts (SW 22 mm), for the secure connection and extension of two tubes.
Tension coupling – metric, 48.3 mm, SW 22 mm
 FVApplication: A pull-through coupling is, so to speak, a clamp that connects two scaffolding tubes to act as an extension. By using such a scaffolding coupling, one tube can be placed on top of another. With this type of “extension”, the two tubes must also be connected using a tube connector (item no. 00377) to stabilise the joint.  Material, properties and features : · Steel, drop-forged, hot-dip galvanised, robust design, ribbed  · Metric thread  · Test mark in accordance with EN 74  · With flanged nuts, 19 or 22 mm spanner size  · Flanged nut and hammer-head screw, electro-galvanised  · Rated for a load of 6.1 kN.  · Tightening torque for the flanged nuts: 50 Nm.
Product number 00492

CHF 14.85*
Silver scaffolding coupler for scaffolding, comprising two C-shaped clamp halves connected by a bolt. Each clamp has a spindle screw for clamping pipes. On a white background.
Reducing swivel coupling, 48.3 mm x 38 mm
 FVApplication :Reducing swivel couplings are used as a rotating connection between a scaffolding tube and a tube with a different diameter. The angle between the two tubes can be freely selected. The different diameter may be smaller or larger than 48.3 mm - in this case 38 mm. Material, properties and features :• Steel, drop-forged, hot-dip galvanised, robust design, ribbed • Metric thread or quick-connect thread (depending on batch) • With flanged nuts 19 or 22 mm spanner size. Flanged nut and hammer-head screw electro-galvanised or hot-dip galvanised (depending on batch)  Additional information and notes :• If you require larger quantities than those shown as “in stock”, please contact us, we can usually assist you • Upon request, we are also happy to offer you reducing swivel couplings in the following combinations: SW 19 For pipe Ø 48x34 mm SW 19 For pipe Ø 48x38 mm SW 19 For pipe Ø 48x42 mm SW 19 For pipe Ø 48x60 mm SW 19 For pipe Ø 48x76 mm
Product number 00139

CHF 31.80*
A shiny, silver-coloured scaffolding coupler, presumably a swivel coupler, consisting of two sturdy moulded metal halves with a central pin. One side has a threaded bolt and a hex nut for tightening or loosening. The surface reflects light.
Standard coupling BB, 48.3 mm, SW 22 mm, hot-dip galvanised with quick-release screw
Application:Standard couplers are used as a rigid connection between two scaffolding tubes. The angle between the two tubes is 90 degrees. It is important to use only certified couplings to ensure reliable safety and compliance with approval standards. Scaffolding couplings are also frequently used for anchoring scaffolding. In this case, the scaffolding clamp is used to secure the steel tube brace (scaffolding anchor) to the scaffolding frame.  Material, properties and features: Steel, drop-forged, hot-dip galvanised, robust design, ribbed Quick-connect thread Test mark in accordance with EN 74 With flanged nuts 19 mm or 22 mm Flange nut and hammer-head screw electro-galvanised Approved as a single coupling for a load of 9.1 kN or as a double coupling for 15.2 kN Tightening torque for flanged nuts: 50 Nm With BB certificate
Product number 04962S

CHF 10.80*
schweizer_fachhandel_shop.jpg

Swiss specialist retailers

Here you will receive expert advice, customer-focused solutions and genuine specialist expertise. Reliable service is guaranteed, even after your purchase!
Your Swiss Expertise Team

sicher_bezahlen.jpg

Secure payment

You can pay by credit card, Maestro, Sofortüberweisung, Google Pay, Apple Pay, Twint and prepayment. Your payment is always processed via an SSL-encrypted connection.

tuev-sued.jpg

TÜV tested

Our pipe connectors are high quality and TÜV-certified.

architekten_siegel.jpg

Recommended by architects & building designers

Recommended by industry experts and practitioners due to reliable, high-performance quality. For you as a customer, this serves as a guarantee of quality, expertise, and service.

This website uses cookies to provide the best possible experience. More information ...
Loading...
Files are being uploaded, please wait...