Scaffolding clamps 60.3 mm (2")

Swivel clamp / swivel coupling, FV, 2000 gParallel or at any angle – the possible applications of the There are almost no limits to the applications of rotary couplings. Wherever more is required as a rigid, right-angled connection between two Scaffolding tubes, swivel couplings are used. Like all Swissclamp couplings Drop-forged and hot-dip galvanised. Heavy-duty - ribbed design. Permissible load 9.1 kN. Flanged nuts fitted. Tightening torque of the flanged nuts 50 Nm. Design in accordance with EN 74.\n\n\n

FVApplication: Standard couplings are used as a rigid connection between a scaffolding tube and a tube with a different diameter. The angle between the two tubes is 90 degrees. Reducing standard couplings are characterised by the fact that one side of the scaffolding clamp is optimised for the standard 48.3 mm tube, whilst the other side is designed for a different diameter. Material, properties and features: • Steel, drop-forged, hot-dip galvanised, robust design, ribbed • Metric thread or quick-connect thread (depending on batch) • Collar nut and hammer-head screw electro-galvanised or hot-dip galvanised (depending on batch) Additional information and notes : • If you require larger quantities than those shown as ‘in stock’, please contact us; we can usually assist you • On request, we are also happy to offer further sizes for standard reducing couplings: SW 19 for pipe Ø 48x34 mm SW 19 for pipe Ø 48x38 mm SW 19 For pipe Ø 48x42 mm SW 19 For pipe Ø 48x60 mm SW 19 for pipe Ø 48x76 mm

FVApplication:Reducing swivel couplings are used as a rotating connection between a scaffolding tube and a tube with a different diameter. The angle between the two tubes can be freely selected. The different diameter may be smaller or larger than 48.3 mm – in this case, 60 mm. Material, properties and features: • Steel, drop-forged, hot-dip galvanised, robust design, ribbed • Metric thread or quick-connect thread (depending on batch) • With flanged nuts, 19 or 22 mm spanner size. Flanged nut and hammer-head screw electro-galvanised or hot-dip galvanised (depending on batch) Additional information and notes :• If you require larger quantities than those shown as “in stock”, please contact us; we can usually assist you • Upon request, we are also happy to offer you reducing rotary couplings in the following combinations: SW 19 For pipe Ø 48x34 mm SW 19 For pipe Ø 48x38 mm SW 19 For pipe Ø 48x42 mm SW 19 For pipe Ø 48x60 mm SW 19 For pipe Ø 48x76 mm

Reducing swivel coupling, electro-galvanised steelMixed sizes 48.3 mm – 60.3 mmRemaining stock: 28 pieces

530g, galvanised, spanner size 22, hole 17mm

Half-clamp or half-coupling, 60.3 mm, "2", galvanised, 600 g Half-couplingVery useful for special constructions, for welding or bolting. As a single coupling for a permissible load of 9 kN. Tightening torque for the flange nuts: 50 Nm. Design complies with EN 74.